[PONTIAC DUDE]

SONNY'S 632 CU. IN. PONTIAC 1X4 ENGINE 1225 HP.
SONNY'S ALSO OFFERS A 1315 H.P. VERSION, WHICH INCLUDES FULLY CNC'D PORTED HI PORT HEADS, AND PRO STOCK VALVE TRAIN UPGRADE
Complete and Dyno Tested
PRICE $33,800.00

632 CU. IN. PONTIAC 1X4 1225 HP - Sonny's Racing Engines & Components
Click image to enlarge
Picture may show optional equipment
Features:
Dart Big "M" block with ARP studs with bronze bushings
Crower/Callies 4.750" stroke 4340 internally balanced crankshaft
SAR/ Manley Pro Series Steel rods
SAR /Venolia pistons
1.031 Tool Steel Wrist Pins
Total Seal rings
SAR/Brodix 14.5 "As Cast" degree aluminum heads featuring Manley titanium valves
T&D shaft mounted rocker system with needle bearing roller tips and one piece rocker bar for endurance
SAR/Dart Intake Ported, with SAR/Custom 1350 CFM Carb
Jesel Belt Drive
Sonny's Custom roller camshaft

These are basic crate engine designs that parts are available.

Now ask Scott Rex or John Langer they have in their................... one off motors.

[PONTIAC DUDE]

For the Money is no object person

***************************

SONNY'S NEW 1000 CU. IN ENGINE HAS ARRIVED OVER 2150 HP ( NATURALLY ASPIRATED)

THE FIRST V8 ENGINE OVER 1000 CU. IN. ENGINE HERE AT SONNY'S!
THIS MONSTER MAKES OVER 2150 HP,and over 1550 Ft. Lbs of Torque, AND YES IT'S NATURALLY ASPIRATED !!!!

Complete and Dyno Tested
PRICE $117,000.00
SONNY'S NEW 1000 CU. IN ENGINE HAS ARRIVED OVER 2150 HP ( NATURALLY ASPIRATED) - Sonny's Racing Engines & Components

Features:
•Sonny's Fully in-house CNC ported Hemispherical Cylinder Heads
•Sonny's/LSM Billet Block with raised cam
•Bryant billet crank
•GRP Billet Aluminum rods
•SAR/Diamond custom pistons
•Sonny's/Isky 1.095 special keyed roller lifters
•Tool steel taper-wall pins
•Total Seal rings
•Manley titanium valves & PSI valve springs
•SAR/ Jesel/T&D rocker system
•Trends one piece pushrods
•Jesel cam belt drive
•Autoverde Dry Sump oiling system
•ATI balancer
•MSD cranktrigger ignition
•SAR Special Sheet Metal Intake with (4) Accufab Throttle Bodies
•SAR/ Big Stuff EFI with Run Map, and 16 Injectors
SAR Billet valve covers
•Mezier hi-torque starter
•Fuel lines, and Fuel Rails with regulator
•Sonny's/ LSM Special 75 mm camshaft

[Elarson]

Note that nowhere in this ad do they call it a BBC.

Eric

[PONTIAC DUDE]

Originally Posted by Elarson

Note that nowhere in this ad do they call it a BBC.

Eric

LOL. Once you reach that point of "development" it is it's own manufacture.
You do see that Sonny's calls his 615 and the 632 a PONTIAC engine!!!!!!!!!!!!!!!!!

Is it legal for Norwalk ?????????????????????????

[Stan Weiss]

Minimum Gasket Sealing distance comes down to what is the engine being used for and what the block design.

Pro Stock is a 4.9 Bore Spacing limit. These are cast iron blocks. For many years they have run 4.72" to 4.75" bores. This is N/A and they make just under 3 HP per ci.

Stan

[johnta1]

615 CU. IN. 14.5 PONTIAC 1X4 PRO STREET PUMP GAS ENGINE (1000hp)
DESIGNED TO OPERATE ON 92 OCTANE PUMP GAS *** Cross Country Endurance Application 925 HP @ 6500 RPM
1000 HP On Pump Gas!!
Complete and Dyno Tested
PRICE $31,200.00

So for less money probably and less CID, you could get a real Pontiac!

Hammer Time Racing

I'll stick with Pontiac, thank you.

[Chris Petersen]

Originally Posted by johnta1

So for less money probably and less CID, you could get a real Pontiac!

Hammer Time Racing

I'll stick with Pontiac, thank you.

Quoted from the web site you listed...

"We are currently UNDER DEVELOPMENT on This engine package & will achieve over 900 HP"

And

"We have no price as of yet on this package.... as we are testing many combinations."

Dont know how you came to this about less $ and CI when its still in development?

[johnta1]

They originally had a price.

$19,500 for the 750 HP engine looks like now.

Call them for a price on the ~1000 HP engine?



Still would look better between the frame rails of your car than that chevy crap.

[GTOGEORGE]

There you go Tom a spread bore 632 cubes Pontiac! LOL



GTO George

[PONTIAC DUDE]

Originally Posted by johnta1

They originally had a price.

$19,500 for the 750 HP engine looks like now.

Call them for a price on the ~1000 HP engine?



Still would look better between the frame rails of your car than that chevy crap.

So that's a 1000hp Pump gas single 4 bbl Pontiac engine?

Looks like it takes compression, a sheet metal intake with 2-4's to achieve the same?

Yea. I want to see the TOAL PACKAGE PRICE!!!!!!!!!!!!!!

Why post a combo that has absolutely no info or pricing. Makes totally no sense.