[bad69bird]

Originally Posted by BrandX

Get ur bubble gum........thats where im headed. I'd love to throw down a 200mph pass with my pontiac at drag week. While the east coast mafia boys are pounding their chests about reaching the 7s.......me and my butler/quillen powered street car will be looking for that BIG 6. The main reason for taking the car to the chassis shop was to make sure it was legal to compete in drag weeks unlimited class. Im working my butt off to finish this project and I cant wait to crack the tires........RELEASE THE TWINS!!!!!!!

LMAO at the ECM comment!

Dude your car is going to be badass! I can't wait to see it finished. I have no doubts about you going 6's, but remember you have to crawl before ya walk. LOL

If you go to Dragweek and do that...you will get a chit ton of exposure and opportunities.

[Jeff Kinsler]

Won't the e-heads crumble and disintegrate into a million pieces during drag week? Thought Isaw that posted somewhere on a diff Pontiac board..

[LiL Jack]

Originally Posted by Jeff Kinsler

Won't the e-heads crumble and disintegrate into a million pieces during drag week? Thought Isaw that posted somewhere on a diff Pontiac board..

Do you mean that canted valve head that can't make more power then some early 90s inline head?

[BADDTA]

Originally Posted by LiL Jack

Do you mean that canted valve head that can't make more power then some early 90s inline head?

Yeah, that's what it is! Remember ECDSITNMF's. LOL.

Brian

[LiL Jack]

Originally Posted by BADDTA

Yeah, that's what it is! Remember ECDSITNMF's. LOL.

Brian

jeez, I can"t keep all that stuff straight!

[twinturrbo406]

Originally Posted by LiL Jack

Do you mean that canted valve head that can't make more power then some early 90s inline head?

... man, you just cant resist can you ?? ... ok fine, i assume you are talkin' about yours & Jeff's E-Heads ?? (90's Inline) ?? ...

... if so, how bout' you finally start tellin' everyone the "real" level of work done to your heads, and Jeff's ?? ...

... which from what i'm told, Gaby has quoted at well over $12,000 dollars to duplicate ?? ... and that is not a BS comment either ...

... if they are just "dinosaur heads" then bud that's one exspensive CNC program, but it does makes one wonder just how much work exactly is being done to require that kind'a cash, lol ...

... oh, wait, how do you guys say it " and we're ReTarded !! " oh crap, i mean and we're OFF !! ...

[Jeff Kinsler]

Originally Posted by twinturrbo406

... man, you just cant resist can you ?? ... ok fine, i assume you are talkin' about yours & Jeff's E-Heads ?? (90's Inline) ?? ...

... if so, how bout' you finally start tellin' everyone the "real" level of work done to your heads, and Jeff's ?? ...

... which from what i'm told, Gaby has quoted at well over $12,000 dollars to duplicate ?? ... and that is not a BS comment either ...

... if they are just "dinosaur heads" then bud that's one exspensive CNC program, but it does makes one wonder just how much work exactly is being done to require that kind'a cash, lol ...

... oh, wait, how do you guys say it " and we're ReTarded !! " oh crap, i mean and we're OFF !! ...

What are you smoking!!!!!! Not even close..

[LiL Jack]

Originally Posted by twinturrbo406

... man, you just cant resist can you ?? ... ok fine, i assume you are talkin' about yours & Jeff's E-Heads ?? (90's Inline) ?? ...

... if so, how bout' you finally start tellin' everyone the "real" level of work done to your heads, and Jeff's ?? ...

... which from what i'm told, Gaby has quoted at well over $12,000 dollars to duplicate ?? ... and that is not a BS comment either ...

... if they are just "dinosaur heads" then bud that's one exspensive CNC program, but it does makes one wonder just how much work exactly is being done to require that kind'a cash, lol ...

... oh, wait, how do you guys say it " and we're ReTarded !! " oh crap, i mean and we're OFF !! ...

You are dead wrong....again. I did not pay that much for my whole motor, rods,pistons, 55 mm cam and all the machine work ported heads and intake.

Wreckmaster just got his heads and a bad azz EFI sheet
metal intake done and his was nowhere close to 12K.

[twinturrbo406]

Originally Posted by Jeff Kinsler

What are you smoking!!!!!! Not even close..

Originally Posted by LiL Jack

You are dead wrong....again. I did not pay that much for my whole motor, rods,pistons, 55 mm cam and all the machine work ported heads and intake.

Wreckmaster just got his heads and a bad azz EFI sheet
metal intake done and his was nowhere close to 12K.

... um, no, i dont do drugs Jeff, lol, sorry ...

... but i am not referring to what 2 members of the ECM paid, i would expect him to hook you up, as i'm sure he did ...

... i'm talkin' about 2 seperate people that have asked about getting there E-Heads sent in to get "ECM Level" of work to their E-heads completed, meaning, they asked how much will it cost to get their heads to the level that are on Jeff's & Lil' Jack's engines, and that was the price they were quoted, that's what i'm sayin' boyz ...

... i really dont care how much of a deal you guys got ... ... clear enough now ?? ...

[Daniel Barton]

Originally Posted by twinturrbo406

... man, you just cant resist can you ?? ... ok fine, i assume you are talkin' about yours & Jeff's E-Heads ?? (90's Inline) ?? ...

... if so, how bout' you finally start tellin' everyone the "real" level of work done to your heads, and Jeff's ?? ...

... which from what i'm told, Gaby has quoted at well over $12,000 dollars to duplicate ?? ... and that is not a BS comment either ...

... if they are just "dinosaur heads" then bud that's one exspensive CNC program, but it does makes one wonder just how much work exactly is being done to require that kind'a cash, lol ...

... oh, wait, how do you guys say it " and we're ReTarded !! " oh crap, i mean and we're OFF !! ...

Okay, as you can see you stated the real level of work done to their heads, so that means that you need to remove the price of porting the intake which is 2500.00, remove the cost of the Jesel rockers which is 1595.99, remove the cost of the Isky EZX .904 lifters which is 1220.00, remove the titanium valves which is 2003.52 and of course remove the cost of the triple valve springs, titanium retainers, keepers, spring locators and valve seals as they are not "work", also there is an option on the quote to remove the old seats, make new copper seats, install them and do a competion valve job, which by the way neither Jeff nor Jack have is an additional 1225.00 but would require you to remove the cost of the first valve job. Hope this helps clarify.

[Jeff Kinsler]

Originally Posted by Daniel Barton

Okay, as you can see you stated the real level of work done to their heads, so that means that you need to remove the price of porting the intake which is 2500.00, remove the cost of the Jesel rockers which is 1595.99, remove the cost of the Isky EZX .904 lifters which is 1220.00, remove the titanium valves which is 2003.52 and of course remove the cost of the triple valve springs, titanium retainers, keepers, spring locators and valve seals as they are not "work", also there is an option on the quote to remove the old seats, make new copper seats, install them and do a competion valve job, which by the way neither Jeff nor Jack have is an additional 1225.00 but would require you to remove the cost of the first valve job. Hope this helps clarify.

Dan, the will never get it..

[GREATGTO]

Originally Posted by Jeff Kinsler

Dan, the will never get it..

You guys must really love Gaby to remove the foot from his own mouth for him, the funny part is you forget the quote he gave a customer to duplicate ecm heads, that quote was 12k. So say Jack did this or Jack did that so remove cost here or there really make no difference. So I'll even ask the question again, how much is it to duplicate Gaby?

I would think it should be the same as the quote you made less than 24 hrs ago.Unless you have a white flag sale going.The other funny part is 7k is way too much, maybe you can break down the 7k price for us too.

[Daniel Barton]

Originally Posted by Daniel Barton

Okay, as you can see you stated the real level of work done to their heads, so that means that you need to remove the price of porting the intake which is 2500.00, remove the cost of the Jesel rockers which is 1595.99, remove the cost of the Isky EZX .904 lifters which is 1220.00, remove the titanium valves which is 2003.52 and of course remove the cost of the triple valve springs, titanium retainers, keepers, spring locators and valve seals as they are not "work", also there is an option on the quote to remove the old seats, make new copper seats, install them and do a competion valve job, which by the way neither Jeff nor Jack have is an additional 1225.00 but would require you to remove the cost of the first valve job. Hope this helps clarify.

Real facts, that appear to have been overlooked.

[slowbird]

I predict i'll have the fastest two scoops in the heads up race (primered two scoops).

[3fastgtos]

Originally Posted by Daniel Barton

Real facts, that appear to have been overlooked.

$2003 for titanium valves? How much of a mark up was that, just curious. Mine were only half that for 8 2.25", but that was two years ago.

[Daniel Barton]

Originally Posted by Daniel Barton

Okay, as you can see you stated the real level of work done to their heads, so that means that you need to remove the price of porting the intake which is 2500.00, remove the cost of the Jesel rockers which is 1595.99, remove the cost of the Isky EZX .904 lifters which is 1220.00, remove the titanium valves which is 2003.52 and of course remove the cost of the triple valve springs, titanium retainers, keepers, spring locators and valve seals as they are not "work", also there is an option on the quote to remove the old seats, make new copper seats, install them and do a competion valve job, which by the way neither Jeff nor Jack have is an additional 1225.00 but would require you to remove the cost of the first valve job. Hope this helps clarify.

Please feel free to point out where Gaby stated that it would cost 12000.00 in work, because that is what you said, you stated the level of work. The only thing that is in fact a fact, is that your fact is not true! I have the quote...

[twinturrbo406]

Originally Posted by Daniel Barton

Please feel free to point out where Gaby stated that it would cost 12000.00 in work, because that is what you said, you stated the level of work. The only thing that is in fact a fact, is that your fact is not true! I have the quote...

... no you do not Dan ...

[BrandX]

Originally Posted by bad69bird

LMAO at the ECM comment!

Dude your car is going to be badass! I can't wait to see it finished. I have no doubts about you going 6's, but remember you have to crawl before ya walk. LOL

If you go to Dragweek and do that...you will get a chit ton of exposure and opportunities.

Thanks man, im excited about it. The car is turning out very nice.