[c5farmer]

http://forums.maxperformanceinc.com/...d.php?t=712279

[1967Tempest]

Originally Posted by c5farmer

http://forums.maxperformanceinc.com/...d.php?t=712279

OUT OF STOCK

[helmerrock]

I've got a set of the 3401VC gaskets. Not sure what they are worth, maybe $40? I know they were hard to find when I needed them a couple years ago and somehow I ended up with a couple sets. Current project is a 400 so won't be using these. Steve

[helmerrock]

Daryl Here are the pics.

[goatwgn]

Checked and found out they supposedly stopped making them about 3 years ago. Gaskets for the larger bore engines will work, but lose a little compression. (They do there job and seal up the engine.) You should get the ones from helmerrock. I think that is your best bet at this point. PY should check into having these reproduced if enough people submit it to them to make it worthwhile.

[JC455]

Originally Posted by goatwgn

Checked and found out they supposedly stopped making them about 3 years ago. Gaskets for the larger bore engines will work, but lose a little compression. (They do there job and seal up the engine.) You should get the ones from helmerrock. I think that is your best bet at this point. PY should check into having these reproduced if enough people submit it to them to make it worthwhile.

Stopped making which- the Victor Reintz or the Innovative Seal?
Thanks!

[DHVoorhees]

Originally Posted by helmerrock

Daryl Here are the pics.

Thanks Helmerrock. Check your Private Messages.