[SLICK1]

Originally Posted by SupergasDil

IF you are looking for big flow on the high ports why not go to Kauffman. I have been talking with Jeff over the past few days about upping my game. My current High Ports which were done by Kauffman about 7 years ago flowed 403 cfm. Now we're going to do the 430 cfm port job along with some other changes to the top of the engine. Going from 1,300hp to roughly 1,700hp. If you want to move air, Jeff's definitely got it dialed in.

This sounds like a very sensible alternative, I must look into this, it's their product, so who would know it better than them?

[john marcella]

Originally Posted by SLICK1

This sounds like a very sensible alternative, I must look into this, it's their product, so who would know it better than them?

Lots! But it all depends on what you're looking for.

Its not about knowing the head, its about knowing what you're doing and knowing how an engine and induction system works.

[Vengeance Race Engines]

Originally Posted by john marcella

Lots! But it all depends on what you're looking for.

Its not about knowing the head, its about knowing what you're doing and knowing how an engine and induction system works.

x2..

[R 70 Judge]

Originally Posted by john marcella

Lots! But it all depends on what you're looking for.

Its not about knowing the head, its about knowing what you're doing and knowing how an engine and induction system works.

This makes sense. You wouldn't go to Edelbrock for the best set of ported eheads.

[johnta1]

Its not about knowing the head, its about knowing what you're doing and knowing how an engine and induction system works.

This makes sense. You wouldn't go to Edelbrock for the best set of ported eheads.

I guess it does to some people.



Edelbrock isn't in the head porting business, they're in it for the money mainly.
(and not a Pontiac only company)



KRE is in the business of making Pontiac power.

[SLICK1]

Originally Posted by johnta1

I guess it does to some people.



Edelbrock isn't in the head porting business, they're in it for the money mainly.
(and not a Pontiac only company)



KRE is in the business of making Pontiac power.

Total Apples and Oranges situation here, thank you for getting it John!

[cfmcnc]

Originally Posted by john marcella

Lots! But it all depends on what you're looking for.

Its not about knowing the head, its about knowing what you're doing and knowing how an engine and induction system works.

X3.Bill C.