| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
I have seen a number of well restored 1978 TA's that have a yellow paint splooge on the right head beside the "OK" stamp. Can anyone verify the accuracy of this and if so was it sprayed or brushed? Here is an example.
|
|
#2
|
||||
|
||||
|
Quote:
Quote:
Quote:
Quote:
Somewhere I've a poorly lighted engine photo of ours that the yellow paint is located under the OK-2 stamp - yellow paint directly under the OK-2 stamp - and the yellow paint appeared to have been "slapped on" quickly with a brush or wide tipped paint gun as most other inspection paint splotches are throughout the GM vehicles. But until I can find photographic "proof" consider the source. . FWIW - over the yrs when TAs were still untouched I've noted W72 engines w the 3 variations* of: 1. No yellow paint,Suggestion: Perhaps you could PM Keith Seymour who has 1st hand assembly line knowledge and experience specifically about this? He's added a great deal of real life scenarios back stories such as in the Echoes of NORWOOD assembly line book thread... *Perhaps the application location varied by inspector (#2, 3, etc.) and shift worked (night or day) when inspected?
Last edited by Alvin; 06-27-2015 at 10:12 AM. |
|
#3
|
||||
|
||||
|
Echoes of Norwood PY threads
Mezzo thread http://forums.maxperformanceinc.com/...=Echos+Norwood Dld thread http://forums.maxperformanceinc.com/...=Echos+Norwood Edit: Can't find the exact thread that Keith and I posted images of 1978 FBody Firebird & Camaro line (SD or early 2nd Gen section?) and he commented on procedures. He's prolly archived the links specific to your OP topic here Bob...just as a suggestion
Last edited by Alvin; 06-27-2015 at 10:20 AM. |
|
#4
|
||||
|
||||
|
Well, a lot got done today and it won't be long. All the accessory drives and brackets are installed. The rear A/C bracket worked perfect as modified despite the valve cover spacers needed for the roller rockers. Clutch is hooked up, wiring harness installed and connected, distributor cap and wires hooked up, exhaust shroud on, ....
Hopefully this bitch will be breathing on her own the weekend after July 4th. There is plenty left to do, but we have it on the run. I am real pleased with how it is coming together. I can't wait to smoke the tires... Here's some pictures. ![]() ![]() ![]() ![]() ![]() ![]()
|
|
#5
|
||||
|
||||
|
Looks sweet!!
__________________
" Long may we DRIVE !" |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|