[gassman_67]

I'm about to lift the body, also found no mounts just ahead of the rear wheels, just puck spacers like at the rear coil springs, is that right?

[Old Goat 67]

Originally Posted by gassman_67

I'm about to lift the body, also found no mounts just ahead of the rear wheels, just puck spacers like at the rear coil springs, is that right?

Yes.

[gtospieg]

Originally Posted by gassman_67

I'm about to lift the body, also found no mounts just ahead of the rear wheels, just puck spacers like at the rear coil springs, is that right?

My Fremont built 67 had bolts there...different plants different ways of doing things

[gassman_67]

Mine was built in Pontiac MI.

[gassman_67]

I'm about to fit this one piece trunk in, all the mounts are loose, but body is still for the most part still on the frame.I was planning a test fit, and was going to sit it on the six new body mounts and loosely put in the bolts for orientation. Do I screw in the self tappers all the way around from the underside inside lip? With the frame still in place, the section by the frame over the axle is in the way, do I go in through the wheel well then?