[NeighborsComplaint]

I used this material:

Frost King Foam and Foil Duct Insulation
Insulates Aluminum or plastic duct work.
Insulates all types HVAC Ducts
Conforms to sharp corners
Stops vibrations
Seals seams and screw heads
12" x 15" Roll $18.77 per Roll

4 rolls did the floors, under the back seat and also the package tray.

[Baron Von Zeppelin]

Probably too late now - and I'm in North Carolina

Have a good 71-72 hood still wearing factory paint.
Paint is worn thin and weathered - but eliminates any surprises.
Will need a light media blasting underside , or sprayed with some of the modern marvel evapo-rust.

Also have a good 71-72 core support
Needs minor repair at lower mount area - on the battery side.
And light media blasting

Last good 71-72 hood I had , was sold to a PY member , I believe in NY.
Built a crate from old pallets and shipped via Forward Air.
Approx 10-11 years ago.

[indymanjoe]

Originally Posted by NeighborsComplaint

I used this material:

Frost King Foam and Foil Duct Insulation
Insulates Aluminum or plastic duct work.
Insulates all types HVAC Ducts
Conforms to sharp corners
Stops vibrations
Seals seams and screw heads
12" x 15" Roll $18.77 per Roll

4 rolls did the floors, under the back seat and also the package tray.

I used the same and am very happy with the results.