#1  
Old 10-28-2018, 10:47 PM
eaglesan13 eaglesan13 is offline
Ultimate Warrior
 
Join Date: May 2002
Location: California
Posts: 2,649
Default

....
Attached Thumbnails
Click image for larger version

Name:	IMGP3888.11.jpg
Views:	194
Size:	50.8 KB
ID:	496272   Click image for larger version

Name:	IMGP3890.12.jpg
Views:	169
Size:	67.6 KB
ID:	496273   Click image for larger version

Name:	IMGP3891.13.jpg
Views:	177
Size:	32.3 KB
ID:	496274   Click image for larger version

Name:	IMGP3892.14.jpg
Views:	200
Size:	58.1 KB
ID:	496275   Click image for larger version

Name:	IMGP3894.15.jpg
Views:	193
Size:	36.5 KB
ID:	496276  


  #2  
Old 10-29-2018, 04:44 PM
TA455HO's Avatar
TA455HO TA455HO is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: Seattle, WA
Posts: 1,345
Default

Chris, this is like the holy grail of 1971 201 interiors. Can you possibly get a shot of the left and right lower front floor vent grilles? I can see the passengers side somewhat in one shot but I can't quite get the details. One of the drivers side, too, would be beauty.

Thanks so much!
Chad

__________________
1966 Ford F250 Deluxe Camper Special Ranger Custom Paint - San Jose plant
http://www.ford-trucks.com/forums/12...al-ranger.html
1966 Ford F250 4x4 Red/White 4-speed - San Jose plant
1966 Ford F250 4x4 White 4-speed - San Jose plant
http://www.ford-trucks.com/forums/11...-f250-4x4.html
1971 Trans Am White/Blue 4-speed limited options - Norwood plant
http://forums.maxperformanceinc.com/...d.php?t=757496
  #3  
Old 10-29-2018, 06:19 PM
TA455HO's Avatar
TA455HO TA455HO is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: Seattle, WA
Posts: 1,345
Default

The lighting seems to make a huge difference, too. If I take an example rear kick panel outside under natural lighting with the same camera it lightens up a lot. It's raining here today so there is no sunshine but you can see the difference between that.





And inside with all of the same original parts from my car, plus the repainted metal pieces from over the door and the A pillar and a chunk of headliner material that is a potential.

You might notice the inner door handle trim pieces in there. I know they are not like yours. I think we had discussed that before.

I kick myself over the seats since the covers were in good shape except for one spot on the drivers seat. Everything probably needed to be resewn at the seams, but the material was still fairly good.





Here's some I have of the original seats. Not much, but something to compare to.







I should have at least saved the original covers, but no going back now.

Chad

__________________
1966 Ford F250 Deluxe Camper Special Ranger Custom Paint - San Jose plant
http://www.ford-trucks.com/forums/12...al-ranger.html
1966 Ford F250 4x4 Red/White 4-speed - San Jose plant
1966 Ford F250 4x4 White 4-speed - San Jose plant
http://www.ford-trucks.com/forums/11...-f250-4x4.html
1971 Trans Am White/Blue 4-speed limited options - Norwood plant
http://forums.maxperformanceinc.com/...d.php?t=757496
  #4  
Old 10-30-2018, 04:22 PM
eaglesan13 eaglesan13 is offline
Ultimate Warrior
 
Join Date: May 2002
Location: California
Posts: 2,649
Default

Do you mean the kick panels? If so, will these pictures do? If not, just let me know, and I will pull the car out and take more pictures (It's too dark in the garage to get good pictures unless I use a flash). Also, those newer pictures you took, the ones taken outside in the natural light, look dead-on to the color of my interior.

Quote:
Originally Posted by TA455HO View Post
Chris, this is like the holy grail of 1971 201 interiors. Can you possibly get a shot of the left and right lower front floor vent grilles? I can see the passengers side somewhat in one shot but I can't quite get the details. One of the drivers side, too, would be beauty.

Thanks so much!
Chad
Attached Thumbnails
Click image for larger version

Name:	IMGP3896.jpg
Views:	166
Size:	42.7 KB
ID:	496503   Click image for larger version

Name:	IMGP3856.jpg
Views:	162
Size:	41.3 KB
ID:	496504  

  #5  
Old 06-02-2021, 10:13 PM
NAPA68 NAPA68 is offline
Member
 
Join Date: Jul 2019
Location: Presque Isle, WI
Posts: 97
Default

I have been spending some time this evening going over this thread (I've been finishing up a fuel injected 64 Corvette as of late).

Chad, thank so much for all of the detail work and all of the references to NOS part numbers. This thread is a real asset to the PY site.

Tim

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:34 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017