[6d7gto]

Originally Posted by Jeff Hamlin

It was well done, but nothing to warrant that.

https://www.mecum.com/lots/FL0122-48...o-convertible/

How much did it go for?

[60sstuff]

Originally Posted by 6d7gto

How much did it go for?

$225K+

They may have gotten more if the park light and emblem were installed correctly.

[nikrnic]

Originally Posted by 60sstuff

$225K+



They may have gotten more if the park light and emblem were installed correctly.

I see a lot of 67 lamps that look off to me.

Sent from my SM-G970U using Tapatalk

[242177P]

Originally Posted by 60sstuff

$225K+

They may have gotten more if the park light and emblem were installed correctly.

Saw that and sighed. Paint dabs. Ink stamps. And then they do something as sloppy
as that? (you probably noticed the "modern" amber bulb in there)

Finger guard *AND* fan shroud? Master cylinder. Really looks like they painted all four
coil springs with... shock absorber gray.

[RedDirtRoad]

Originally Posted by 242177P

Saw that and sighed. Paint dabs. Ink stamps. And then they do something as sloppy
as that? (you probably noticed the "modern" amber bulb in there)

Finger guard *AND* fan shroud? Master cylinder. Really looks like they painted all four
coil springs with... shock absorber gray.

Not going to pick the car apart. It’s a nice restoration with a few incorrect things.
As stated above the fan shroud is wrong
Also they are using the generic Assm. Decals which are for a ram air car. ZL axle on the tube
Being an auto with air the car isn’t available with a 4:33 rear.