| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
|
||||
|
||||
|
before you try to repair the top soft surface;
Look at the underside, and address that I have tried in the past to repair my original console (and although I believe 1970 consoles used a different plastic), I was never able to find a fix that stayed on... If the backing is broken, and you can fix that, then maybe go to an ineterior shop that specializes in this stuff - I've seen some incredible vinyl and leather repairs.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
|
#2
|
||||
|
||||
|
Quote:
I’ve got a pseudo 2 tone interior going by being lazy and not painting the de facto black replacement lower door panels and lower rear panels. I could buy a new console and also leave it black I guess but that may look pretty dumb :-)
__________________
-Darryl 1977 Trans Am restomod with E-Rod LS3 and 4L70E. |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|