 |
|
| Pontiac Business Entities Exchange Sources, Compliments and Grievances in regard to Pontiac parts or services rendered by an individual or business. |
| Reply |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-01-2006, 11:12 PM
|
||||
|
||||
Jet-Hot
I just wanted to let everyone know that back in 2000 I had a set of headers coated by Jet-Hot, these headers had alot of cleanings (oil and dirt)....Well to make a long story short, My headers had started to lose some of the coating it was basically flaking off....I talked to Jet-Hot they found me in the computer and recoated them for free no questions asked :D ...I did have to pay $27.00 for the return shipping thou, but after 6 years and to recoat at no charge I have no complaints... Well there is my story and good deed for the day :)
Chad
__________________
3500lb 10.5" tire. [email protected] with a poor 60' |
|
#2
03-02-2006, 01:21 AM
|
||||
|
||||
|
I guess I better call Jet-Hot. I had my vintage (NOS) Tri-Y's done about a 18 months ago. I noticed some surface rust 1/2 way through last season. I figured I would wait till seasons end and send them off. In reading the warranty it stated the 3 year warranty was for RUST THROUGH!! So I figue I am screwed :mad:
Only trouble is if they say send them back....I have no other headers that will fit my car... :confused:
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#3
03-02-2006, 01:08 PM
|
|||
|
|||
|
60Man, What kind of valve covers are those? Got a full picture? Thanks, Bruce
__________________
'79 T/A 6.6 4-sp, 3.23 , 463" E-heads, 252/262 hyd roller, TII, Holley 830, 8.384 @ 93.86 - 1/8, 12.5 @ 116 - 1/4, 2.035 60', 3800 lbs. w/o driver |
|
#4
03-02-2006, 06:31 PM
|
||||
|
||||
|
They Micky Thompson's. I bead blasted them and then clear coated them and added a decal. 'm also using IA spacers under them.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#5
03-02-2006, 06:46 PM
|
|||
|
|||
|
Thanks, Very nice. Why the spacer, running a stud girdle? Are they as tall as a stock chrome cover? Thanks, Bruce
__________________
'79 T/A 6.6 4-sp, 3.23 , 463" E-heads, 252/262 hyd roller, TII, Holley 830, 8.384 @ 93.86 - 1/8, 12.5 @ 116 - 1/4, 2.035 60', 3800 lbs. w/o driver |
|
#6
03-02-2006, 07:01 PM
|
||||
|
||||
|
Here is what mine looked like....
  
__________________
3500lb 10.5" tire. [email protected] with a poor 60' |
|
#7
03-02-2006, 10:31 PM
|
||||
|
||||
|
Bruce: No stud girdle...yet. May have one though as RPM window will be 7K this season. Just wanted plenty of clearance for the HS 1.65 rockers.
dammen8: I won't feel bad at all for calling Jet Hot.... :D
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#8
03-03-2006, 01:57 AM
|
||||
|
||||
|
Chad- That's great to hear that Jet-Hot would re-do your 6 year old coatings for free. Not many businesses would do something like that.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
