| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
01-19-2011, 12:57 AM
|
|||
|
|||
68 Power Window Boot
I can't find and information (pictures) in the 68 service manual or body manual about the power boot.
I assume the car would be punched out at the dimple labeled 3.  Also does anyone know what the hole labeled "1" is for. I also assume the the door is puched where the dimple is.  The boot is bigger on one end and looks like it could be bolted or riveted to the door and car. I assume that the smaller end is installed in the door and that it would be positioned with the flaps pointed down.   I would really appreciate it if someone could confirm that this is the correct way before I start punching holes.
__________________
68 Lemans - GTO appearance LS3 68 Eldorado - waiting for restoration 96 Roadmaster Wagon 2014 Infiniti Q50S Hybrid Marietta GA |
|
#2
01-19-2011, 02:13 AM
|
|||
|
|||
|
You have your holes and dimples labeled correctly. Hole A is for the antenna lead. We screwed the grommet to the door.
__________________
Paul FAST Automotive -The Pontiac restoration shop, not the fuel injection guys! I had the name first. My site... needs updated- www.fastrestorations.com 68 GTO's (RA II, RA I, HO, convert, Pro Street, Racecar, etc.), 2 69 GTO Judges, 70 GTO racecar -10.77 @ 124mph, 68 Tempest survivor, 3 03 Aztecs! |
|
#3
01-19-2011, 04:21 AM
|
||||
|
||||
It will be at a little below your arm rest on the door panel. It is 327 am i will look at it beter in the day light.
|
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
