| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
|
|
#1
09-12-2014, 12:24 PM
|
|||
|
|||
Manual antenna 1966
Hi,
I am about to install a manual antenna on the right front fender on my LeMans 1966. I have an original style antenna with the correct base, designed to be attatched to the fender flange with a small screw. I understand that I have to remove the fender, but I cant find any information of the correct location of the holes. Can anyone help me with this? If it is hard to get exact location or a template, I would apprechiate a few close up photos from a correct installation. Best regards, Peter Tillman |
|
#2
09-12-2014, 05:35 PM
|
|||
|
|||
|
You don't need to remove the fender if you have the right adapter. Open the door and you should see a fairly small drilled and taped hole, that's what you're wanting.
__________________
Practicing social distancing for 65+ years |
|
#3
09-13-2014, 03:22 AM
|
|||
|
|||
|
OK, thanks
The problem is that I have to drill a hole in the upper skin of the fender for the base and it has to be in the correct location, otherwise the antenna would be in wrong angle /Peter Tillman |
|
#4
09-13-2014, 07:27 AM
|
||||
|
||||
|
Don't have any loose fenders at the shop, but these may help.
The Antenna body will dictate the location based on the mounting tab location. Once you get a center hole I would then use a step bit to slowly enlarge the hole. Gasket & escutcheon allow for some hole "adjustment"
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. 
Last edited by Jeff Hamlin; 06-12-2015 at 05:49 PM. |
|
#5
09-13-2014, 07:59 AM
|
|||
|
|||
|
Thanks Jeff!
This will make it a lot easier. Regards Peter Tillman |
|
#6
09-13-2014, 05:44 PM
|
||||
|
||||
|
I used one of these to make the hole and it cuts a very clean and neat hole:
Greenlee 7211BB-1/2 Slug-Buster Knockout Punch Unit, 7/8-Inch |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Hybrid Mode
