| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I may have posted this question before but can’t find it using search function. I’ll be sure to record the answer this time. Rebuilding engine in my 66 GTO using Fel Pro gasket set 2601025. It contains two different intake gaskets(see photos attached) . Which is correct A or B? A is stamped 90205 and R3. B is stamped 9980 and R 4. Also, does the printed side of gasket face the head or the intake or does it even matter?
__________________
Terry Hunt "He'd need 5 years in the fifth grade just to get an idiot certificate" Smokey Yunick re: Bill France Jr. |
|
#2
|
||||
|
||||
|
If it has the 66 heads use B.
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! W.E.C moment "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
|
#3
|
||||
|
||||
|
A is for 1972 and later intakes with any year heads.
B is for 1971 and earlier intakes and heads. |
| The Following User Says Thank You to Kenth For This Useful Post: | ||
|
#4
|
|||
|
|||
|
Okay B it is. Does it matter which side of gasket faces the intake?
__________________
Terry Hunt "He'd need 5 years in the fifth grade just to get an idiot certificate" Smokey Yunick re: Bill France Jr. |
|
#5
|
||||
|
||||
|
They will fit only one way.
HTH |
|
#6
|
||||
|
||||
|
when in doubt;
Use a gasket that matches your heads.
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|