| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-21-2003, 02:53 PM
|
|||
|
|||
i am looking for a cheap 4-speed for my 400. i was thinking about getting a muncie but those cost a lot to get. i am just wondering what is a good yet cheap trans to get that can stand up to about 400hp and maybe 450ft/lbs? As long as it will last a while until i could upgrade to something better. i am also a student and dont have a lot of cash that is why i am asking you guys this. thanks.
chris cook |
|
#2
02-21-2003, 02:53 PM
|
|||
|
|||
|
i am looking for a cheap 4-speed for my 400. i was thinking about getting a muncie but those cost a lot to get. i am just wondering what is a good yet cheap trans to get that can stand up to about 400hp and maybe 450ft/lbs? As long as it will last a while until i could upgrade to something better. i am also a student and dont have a lot of cash that is why i am asking you guys this. thanks.
chris cook |
|
#3
02-21-2003, 03:50 PM
|
|||
|
|||
|
I dont think there is really anything out there that will take 450 TQ and be cheap.Tom
|
|
#4
02-21-2003, 05:52 PM
|
|||
|
|||
|
me either,
I used to go through t-10' with a 389 and 348hp. http://kurtspontiac.homestead.com/Pre1964Pontiacs.html
__________________
http://kurtspontiac.homestead.com/Pre1964Pontiacs.html |
|
#5
02-21-2003, 10:14 PM
|
||||
|
||||
|
Nope! No cheap ones that will fit your bill!
Munci's or the later T-10's will run 400 for a used one of unknown abuse and then figure 250+ for a rebuild!  Usually I'm found working on my Pontiac. If you want to find me Look for the white picket fence and all the old Pontiacs parked outside. And the half dissembled engine sprawled all over the driveway! 
__________________
Try calling CRUSHPROOF! 512-386-9889 |
|
#6
02-22-2003, 08:06 PM
|
|||
|
|||
|
I heard that some company makes a HD case for Muncies that really help the durabilty. Original cases will twist and bind. Makes quick shifts hard to do consistantly.
A chrysler HD A-833 will handle the abuse if you don't mind the weight. You might have to do some modifications for it to fit though. Bartman Ponies run but Birds fly
__________________
Ponies run but Birds fly |
|
#7
02-23-2003, 09:19 PM
|
|||
|
|||
|
what if i decrease the power a little or is there nothing i can really use that is cheap? thanks
chris |
|
#8
02-24-2003, 07:48 AM
|
||||
|
||||
|
M-21 HD will survive the 455 (has a TH400 output shaft size, and a fine-spline inputr shaft, and the 1"countershaft support) on the street. Butt,
...add slicks and it's crushin roulette.
__________________
95 Towncar that needs more TQ. Sold 2023: 12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
