| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-26-2003, 11:59 AM
|
|||
|
|||
I am taking my car to get dyno tuned on Tuesday on a dynojet chassis dyno. What kind of horsepower and torque do you think I will make? Car is a 4 speed w/ 3.70 rear.
My engine combination is as follows: 461 - 400 block .035" over Ross pistons dished for 10.25:1, 4.25" stroke, and 6.8" BB chevy rods. Edelbrock 72cc heads (don't have flow numbers but they have had the ports cleaned up and port matched) Ultradyne Cam with 247 @ .050 intake and exhaust. 110 LSA. Installed at 104, .530" lift. Torker II intake w/ 850 Demon carb. Dougs headers into 3" pipes and 3" Dynomax ultraflow mufflers. Thanks |
|
#2
04-26-2003, 11:59 AM
|
|||
|
|||
|
I am taking my car to get dyno tuned on Tuesday on a dynojet chassis dyno. What kind of horsepower and torque do you think I will make? Car is a 4 speed w/ 3.70 rear.
My engine combination is as follows: 461 - 400 block .035" over Ross pistons dished for 10.25:1, 4.25" stroke, and 6.8" BB chevy rods. Edelbrock 72cc heads (don't have flow numbers but they have had the ports cleaned up and port matched) Ultradyne Cam with 247 @ .050 intake and exhaust. 110 LSA. Installed at 104, .530" lift. Torker II intake w/ 850 Demon carb. Dougs headers into 3" pipes and 3" Dynomax ultraflow mufflers. Thanks |
|
#3
04-26-2003, 01:13 PM
|
||||
|
||||
|
Tuned properly, I'm thinking you should see a minimum of 400-HP at the rear wheels.
__________________
Just a blind squirrel looking for a nut. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
