Suspension TECH Including Brakes, Wheels and tires

          
Reply
 
Thread Tools Display Modes
  #1  
Old 10-05-2005, 08:44 AM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default Inner tie rods

Anybody else going thru this problem bought spicer inner tie rods and the head is to big and hits the frame on the drivers side when i turn the other side is ok was told spicer is the oem part

  #2  
Old 10-07-2005, 05:44 AM
Joe Joe is offline
Senior Chief
 
Join Date: Mar 2000
Location: henrietta,NY, USA
Posts: 263
Default

I will have to check mine. I too just installed Spicer inners for my 66. In process of tourqueing everything down. Should know tonight.

  #3  
Old 10-07-2005, 07:19 AM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

Joe, Mine is a 68 even tried a cheap er one from parts master the head is smaller but still not as small as orig one it hit .

  #4  
Old 10-08-2005, 07:38 AM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

Does any one know is the center link across the front by the frame horn closer to one side or should be evenly spaced across was thinkin maybe wrong pitman arm can someone give me #,s off / measurement how long pit is for 68 gto w ps. thanks.

  #5  
Old 10-10-2005, 08:46 PM
retrojoe's Avatar
retrojoe retrojoe is offline
Senior Chief
 
Join Date: Feb 2002
Location: Reno
Posts: 480
Default

Did you buy your tie rods from PY? If so, beware and double check them!! I found out the hard way that the sleeves didn't lock down and my tie rods worked their way out and ruined two new tires on my car. I'm dang lucky that it wasn't worse than that!!!

__________________

"It beats pickin' cotton and waitin' to be forgotten"

  #6  
Old 10-11-2005, 08:37 AM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

ok thanks

  #7  
Old 10-11-2005, 06:13 PM
Shadowjack Shadowjack is offline
Ultimate Warrior
 
Join Date: Sep 2003
Location: Nebraska
Posts: 1,696
Default

The pitman arm should point fore and aft when the steering is centered, as should the idler arm. The centerlink should be parallel to the crossmember. If it's not, you probably have a Firebird pitman arm, but somebody would have had to screw up to do so.

  #8  
Old 10-11-2005, 07:55 PM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

Thanks Shadowjack the the pitman is straight but it drops down slightly i,m thinkin a bent center link i,m gonna buy a new one and try.

  #9  
Old 10-12-2005, 06:36 AM
Joe Joe is offline
Senior Chief
 
Join Date: Mar 2000
Location: henrietta,NY, USA
Posts: 263
Default

I finished up my 66 front end with the spicer inners. Purchased from Autozone. Everything is fine. Hope you get it figured out.
Regards

  #10  
Old 11-02-2005, 10:01 AM
pugslyx234 pugslyx234 is offline
Chief Ponti-yacker
 
Join Date: Dec 2004
Location: washington state
Posts: 620
Default

Shadowjack you were absolutely correct i had the wrong pitman arm went to our classic wrecking yard here and got one and now its perfect thanks all.

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:08 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017