[1967Tempest]

I need to know where I can get a smaller water pump pulley. I currently have a 67 tempest with a 77 Bonneville 400. Had the car out all last Sunday. She ran fine and the temperature never got over 200 at an idle. I have an 8 inch water pump pulley and an 8 inch crank pulley. Already did cast impeller pump and spacer mod. Monster 4 core rad. New balanced 180 t-stat. Gauge has been tested to read accurate. I DON'T want her to get over 185-190 at idle EVER. Last thing is water pump pulley. If any one has some info that would help. Especially part numbers, where to get one, where to order one or another car I might be able to find one in. Also if any one has one for sale and is in North Jersey or NE corner of PA, I will pick it up.

Thanks. This forum and its members have practically saved my car from extinction.
Dave

[RARON455]

I had a 8 inch pulley on my bird and bought a 6 1/2 one form a guy off of ebay He did not know what it came off of though, I would definately check ebay if you cant find one hope this helps, I talked to another guy on this site that said he used a 5 inch pulley off of a ford, He also did not say what it came off.

[kustom66]

just got one through march performance about 85.00

[Donovan]

http://www.ramairrestoration.com/cat...444afb8d844eb9


any pulley you need

[Blue '66]

The MAIN thing is to get a set of the pulleys because they have different offsets on different years.I had a hard time finding A/C pulleys for my '66 GTO.So I decided to go with '67,they are ever so slightly off from a '66.

[Pontiacman1970]

I have the pulley you want.

Sent you an email