[Norwood]

Originally Posted by 70RAlll

You will also need to reuse the top brace that the inner fender mounts to with the upper two bolts. When you compar the two fenders side by side you will see the difference.It is a series of spot welds that you will drill out,maybe 8-10 and just plug weld it back in on the 1979 fender and grind the plug welds smooth.This has been done many times by restorers here in the states to "make" a 70-73 fender. works quite well. good luck..

Bill, he doesn't NEED to do that. He needs to do that if he wants the fender to look correct when the hood is opened, but it is not needed for the fender to fit.