[Cheyenne]

Putting a clutch set up on a 62 389. Have the bell # 9770091 ,,but not sure how to ID correct flywheel ,was told 61-2 are there own. 166 teeth but something about the center hole ??

[tom s]

call Brad at Fabfraft,he can give you the best info!Tom

[tom s]

also a 977 bell is not correct for a 61-62 car?Tom

[Cheyenne]

Originally Posted by tom s

call Brad at Fabcraft,he can give you the best info!Tom

thanks,but not looking for the $300 flywheels they sell ,,just asking about a stock one and how to ID it

And im told the bell will work ,,just the the top bolt holes were larger

[tom s]

ASK him for advice!He can tell you the diff.Also if your going to do ANY hipo stuff you will NOT want a stock cast flywheel if you value your feet.The bell will fit but you will need to mod if your going to use stock 61-62 clutch linkage.Tom

[Cheyenne]

Originally Posted by tom s

ASK him for advice!He can tell you the diff.Also if your going to do ANY hipo stuff you will NOT want a stock cast flywheel if you value your feet.The bell will fit but you will need to mod if your going to use stock 61-62 clutch linkage.Tom

Thank you