Matt1970pon,
Do you have the polarity correct? + - poles get switched when changing from either type of welding.
Also while you tune your welder on a scrap piece of similar gauge sheet metal your welding adjust the wire feed while your welding. You want the sound of sizzeling bacon.
Its my understanding fux core is ideal for welding outside in the wind or slight wind. Never use sheilding gas outside. Even a light wind will cause the bead to be 
__________________
69 400 Block, .030 over, KRE eagle stroker kt, KRE,CNC ported e-heads 310 cfm, port match RPM , comp roller 236/ [email protected] 586/600 lift 110 LS. 1.5 HS roller rockers, 350 Transmission, Red Neck tight 3500 stall converter, Ford 9” with 3.75’s, Strange center section, Moser 31spline axels, 29”Mt slicks, HRPARTSNSTUff anti roll system, Doug’s Headers 3.5” collectors, 22”Dynomax mufflers w/ H-pipe, Cliffs Q-jet, Fuel cell with sumps, Mallory 140 fuel pump and filter. Denny’s 3.5” drive shaft.
Last edited by 70 Lemans; 01-24-2009 at 10:31 AM.
|
01-24-2009, 10:10 AM
Threaded Mode