[70RAlll]

On page 5 of this thread wilder lists 25 or so 1 year only parts. here are some additions:

1. front inner wheel wells bottom foward filler panel. 70 had 4 upper mount bolts, 71 up has 2
2. 70 only vacuum actuated heater water switch(TA's only ,71 TA's didn't use this anymore)
3. Van Nuys core support to front subframe bottom bolts are different than Norwoods in 1970 and all 71's,they are 1/2" or so shorter and have a different part number with a "F" foundry marking
4. "J" brace to front subframe mounts, Van Nuys used 1 clip and 1 bolt, Norwood and 71 up used 2 of these bolts and no clip.
5. original 70 front spoiler had the 3 center mount holes recessed,didn't need spacers and long mount bolts as 71 up did.
6.A/C soft line from Condensor to dryer(was soft/hard in 70,71 up was all hard line)
8. headlight bezels
9. body colored front parking light plastic pieces
10. extra ground strap inside of scoop(was it used in 71??)
11. yellowish/cream-black plastic vaccuum break(choke pull-off) on RamAir Quadrajets-earlier years used grey/black or black/black pull offs- and 2 port metal vacuum break on non Ramair quadrajets
12. hi pressure power steering hose(with red stripe)
13. rubber drain tube on bottom of a/c box,not used in 71
14 upper radiator hose(71 used same lower hose as 70)
15 3/4" heater hose-stamped script in 70, branded script in 71
16 '70 used throttle cable with hole mount to carb bracket, 71 up used ball/clip design.
17 same with carb throttle bracket, used stud vs ball for throttle cables mount.

I think the list on page 5 of this thread completes the 1970 one year only parts.. there are some finish/color differences, but actual "gard" parts...i think this completes it..