Pontiac - Street No question too basic here!

          
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-27-2009, 05:04 PM
matt65's Avatar
matt65 matt65 is offline
Junior Member
 
Join Date: Sep 2008
Location: Westmont IL
Posts: 18
Default 455 Pontiac in a chevy

Car runs 11.01 @ 118.4 with a 1.44 60ft
(driven 17mi to and from work several times a week and raced on 93 pump gas)

Block-.030 '73 455
Rods-eagle floating pin
Pistons-TRW bushed.
Crank-stock 4.210 -.010
Cam-Ultradyne Hyd flat tappet 239/248 @50 on a 110/106 .510 lift in and ex
Heads-KRE 310 cnc 85cc chambers (10.5 compression)
Rockers-1.5 proform
Intake-Performer RPM no portwork
Carb-proform 850 80/86 jets 4.5 powervalve
Crab spacer-1 inch open
Fuel pump-RobbMC 550hp mech with -8 feed sumped tank.
Waterpump-stock mech w march pulleys.
Fan-Flexalite 3300cfm

Trans-400 rev manual w/ 9 1/2 4000 stall converter

Rearend-Moser 12 bolt 3.73 gear spool
(has HnR anti roll, Wolfe Racecraft adj uppers)
Wheels-15x8 w/28x9 mickey slicks 15x4 front


 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:26 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017