[Thomasmoto]

Originally Posted by goatwgn

A more powerful blower motor then the one offered in old GM cars, that would fit right in place of the other. About the only thing (other than overdrive transmissions) they have in newer cars I really like over older ones is more powerful blowers for the hvac systems. I have an underdash ac in my 66 with a nice powerful blower that cools the car off quick. My 74 Olds has a weaker factory blower that takes quite a bit longer to cool the car off. The ac works well, it would just be faster on 100 degree days if the blower could move more air.And this is the case with all older units I have seen.

YES YES YES!!!!!!!!!!!!!! PLEASE!!!!!!!!!!!!!!!!

[BIGBLUE]

Rear patch panels for a 1967 Pontiac grand Prix, along with reasonably priced one piece front disk brake rotors.

[BIGG-TATER]

Originally Posted by topless lemans

Front grills and eye brows for 67 lemans and maybe the rear tail lights or at least the Chrome piece for them

Yes I agree, give the lemans and tempest some love

[70&71 TRANSAM OWNER]

HI ALL


Has anyone seen or herd of a aftermarket rear bumper for the 70 -- 73 Firebirds??

Bruce

[2manyT/A'S]

Originally Posted by 70&71 TRANSAM OWNER

HI ALL


Has anyone seen or herd of a aftermarket rear bumper for the 70 -- 73 Firebirds??

Bruce

As I recall,it was on Goodmarks list of things to do,but plans were scuttled just before the "great depression" about 2 1/2 years ago.

[PMDRACER]

How about a metal patch panel for the 70-72 dashboard that includes the knob/mounting cups and crossbar?

[Ragtop Man]

'66 2+2 lower bodyside stainless moldings, looks like a very simple part to me at least, few cars have this complete. Big car tripower flying saucer air cleaner, too.

[Hillbilly40]

The trunk lip moulding for all the pontiac big cars of the 60's

[goatwgn]

A bracket to mount on the throttle shaft of the 1967-1971 Pontiac quadrajet to adapt the "correct" geometry for a TV cable on an overdrive transmission conversion, as well as one for 1964-66 tripower 2GC center carbs and older AFBs.

[goatwgn]

Also would like to see the lower steering column trim peice(that mount around the column where it meets the dash with 2 screws at the bottom) for 1966 midsize models.

[Father&Son73T/A]

Unitized ignition wire looms for 71-74 ,stop paying insane amounts on Epay!

[GTOTEAM]

My dash is cut for a stereo, so I want to get a radio delete plate for it, instead of a new dash insert.

Any one make one or know if they exist ?

email [email protected]

604 813 3685

thanks

[Rack776]

Ideas for For 70-81 Firebird - T/A Parts

1. Front Floor Pans that include the toe boards, these rust with the floors

2. Rear Frame Rails that include the front mounting point for the leaf springs
or at least patch panels for this area.

3. 75-81 Full quarters, please someone has to do these some day,
I dont want to pay $1000 for NOS and I dont want to ship a donor body section from the west out to PA

4. 74-75 Bird front bumper repair parts, a nice rubberized cover to reskin a used bumper
that does not require working with an overpriced fiberglass repo that does not fit.

5. Moulded Headliner board for 75 & up Bird that is not a flat piece of plastic
you have to fold into place. it leaves creases down the sides of the roof

A fiberglass shell might work? Shipping would be no more akward than a glass hood.

Just some ideas & wishfull thinking

[mxrandy]

1970 Firebird interior parts in colors other than black. Sandlewood, Saddle etc.

[GaryK]

61-63 Tempest parts!

[66Post]

Roof Rail Reading Lamp "fish eye" lenses and retainer, perhaps the whole light assembly for 1966 and 1967 GTO's.

[66Post]

Here's another one: Factory shoulder belt set up with retainer for January built and up 1966 - 1967 GTO, LeMans Tempest for those cars with the factory shoulder belt anchor installed.

[andrewT]

Originally Posted by PMDRACER

How about a metal patch panel for the 70-72 dashboard that includes the knob/mounting cups and crossbar?

this! a lower part of the dash bezel (the metal part, not the wood grained part)

[Region Warrior]

Aluminum brake drums.
Oh ya...make'm HD. Better then GM did.

[PONTIAC-ONE]

Originally Posted by 2manyT/A'S

As I recall,it was on Goodmarks list of things to do,but plans were scuttled just before the "great depression" about 2 1/2 years ago.

I would buy 2 bumpers right now.

The demand is there, re-chroming an old one costs 2X of the price of the reproductions from the price I have seen so I'm sure they would sell well if the quality is there.

BUILD THE DAMN THINGS ALREADY !!