| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-01-2010, 08:55 PM
|
|||
|
|||
What will my car run in the 1/4?
Ok, I'd like to hear what you guys think my car will run at the track so here is as much info I can give ya and I think it will be interesting to see what you guys come up with.
78 trans am stock body as came from factory minus ac 250 pound bad azz driver experienced racer, local racing legend 1972 400 with 85k stock bottom end fairly fresh 670 heads stock port with springs to match cam Lunati 490 490 lift hydraulic flat tappet cam. performer intake 750 dp holley th350 with shift kit bm 3500 stahl 3.73 gears 28 tall hoosier drag radials stock suspension stock hei ignition So, in a nutshell a tired 400 with 670 heads, nice cam good to 5800 rpm and a driver that knows how to tune pretty well. Lets hear some thoughts and combos that you guys have used!
__________________
HI, I'M RICKY BOBBY, AND IF YOU DON'T CHEW BIG RED GUM, THEN F*(& YOU! |
|
#2
09-01-2010, 09:02 PM
|
||||
|
||||
|
13.2@102
__________________
63 Catalina coupe 467 cid budget drag car low 11's 1/4 , 7.0's 1/8th pump gas n/a 66 Star Chief Executive 59k mile 389 67 IH Scout project 2WD "Indian Scout" 69 Le Mans 2 dr HT 350 91k mile 15 sec 1/4 69 Firebird 400 Burgandy/Black 70 Olds Rallye 350 F85 4 speed 3.91's 70 Olds Cutlass Cruiser Red Wagon 350 108k miles 15 sec 1/4 12 sec w 455 74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8 2020 RAM 1500 SLT 4x4 5.7 A8 Hemi 2008 Saab 9-3 2.0T convertible |
|
#3
09-01-2010, 09:16 PM
|
|||
|
|||
|
13.00@ 105 if good traction is there .
|
|
#4
09-01-2010, 09:21 PM
|
||||
|
||||
|
13.76 @ 97mph
__________________
 Johnny US Army Retired1978 T/A 463 Pontiac, KRE 74cc 300CFM D-ports, Howard's custom SFT, Nash Intake,QFT 950 E85 carb, TCI TH-350, 4200 converter 3.73 12 bolt [email protected] 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1972 LeMans 350 Pontiac H/S Drags project |
|
#5
09-01-2010, 09:52 PM
|
||||
|
||||
|
13,80's
|
|
#6
09-01-2010, 10:42 PM
|
||||
|
||||
|
Stock untouched short block with new heads,HMMM.Does the conv stall 3500? If it does that is too much conv for that cam.I'm guessing car w/driver 3850 #,13.70's 100 mph.
|
|
#7
09-01-2010, 11:30 PM
|
||||
|
||||
|
14.00
__________________
24 beer in a case. 24 Hours in a day. Coincidence? I think not. " Steve Wright" |
|
#8
09-02-2010, 04:02 AM
|
|||
|
|||
|
Hmmm...reminds me of Pass Time 13.4/102.Any nitrous????
|
|
#9
09-02-2010, 06:23 AM
|
||||
|
||||
|
13.60's @100
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#10
09-02-2010, 07:18 AM
|
||||
|
||||
|
Quote:
|
|
#11
09-02-2010, 08:05 AM
|
|||
|
|||
|
LOL this IS like pass time lol. Some of you guys are close. I have ran the car before without the cam shifting at 48-900 rpm cause thats all she would do. The converter doesn't stahl at 3500 and yes, it's too much for this cam. It stahled around 3000.
__________________
HI, I'M RICKY BOBBY, AND IF YOU DON'T CHEW BIG RED GUM, THEN F*(& YOU! |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
