| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#221
11-06-2010, 09:31 PM
|
||||
|
||||
We installed the ATI Flex Plate, we needed to enlarge the holes slightly and sanded of the powder coating where the bolts attach. Installed the PTC Torque Converter. Bolted the TH400 up and put it in place.
|
|
#222
11-06-2010, 09:34 PM
|
||||
|
||||
|
Some pictures showing how this intake and carb set-up would go through the Hood. Still considering the Northwind.
|
|
#223
11-07-2010, 08:49 PM
|
||||
|
||||
|
Ed and I installed the Indian Adventures Headers. We had to file down each flange to make them true. Shimmed and Tightened the PTC 11 Inch Torque Converter.
|
|
#224
11-07-2010, 09:02 PM
|
||||
|
||||
|
Installed the MSD Distributor and Cut the Custom MSD wires to fit. Next is the exhaust.
|
|
#225
11-14-2010, 08:47 AM
|
||||
|
||||
|
Ram Air Restoration Ova; Exhaust install. I went with the 3.5 inch oval pipes to Spin Tech Mufflers into 3 inch round tail-pipes.
|
|
#226
11-14-2010, 08:52 AM
|
||||
|
||||
|
We mocked the exhaust up from the tail pipes forward, using ratchet straps, tie raps and our transmission jack. Initially we were unsure how the final fit would be, keep reading.
|
|
#227
11-14-2010, 09:07 AM
|
||||
|
||||
|
Adjusting height and centerline, making sure everything is level and square.
|
|
#228
11-14-2010, 09:13 AM
|
||||
|
||||
|
We used universal hangers in front of the differential, rear hangers need to be installed. It got too late and we decided to call it a night and weld all the seams today. Overall we are very happy with the fit. If only the tail pipes exited further back, but we can fix that. It is tight to the floor. The quality was very good, instructions cold have been more detailed. WE LIKE IT!!!!! And we would recommend it. Took a few hours to mock up, about a 2 day install if you want it to look the best. For sound, we will wait until next week.
|
|
#229
11-15-2010, 09:50 PM
|
||||
|
||||
|
looks nice guys. you have been very busy lately!
__________________
1968 firebird cameo white on red 400 4 speed 1969 carousel red firebird 455, richmond 5 speed 1964 gto pump gas, 505 IA2 EHeads, EFI, 92 mm turbo ice cream getter in process now.... 1970 lemans hardtop, gto clone Atoll Blue 1972 Maverick powered by 2004 gto ls1 and t56 6 speed, 8.8, fox strut front end, wifes car |
|
#230
11-16-2010, 10:49 PM
|
||||
|
||||
|
Quote:
|
|
#231
11-28-2010, 01:55 AM
|
||||
|
||||
|
Oil Pressure 60LBS. Water Temp 185 with a 185 Thermostat. 1050 Ultra was put on out of the box and with minor tuning ran well. We installed the Auto Meter Wide Band Air Fuel Gauge and it was a big help in tuning. The ignition is a combination of MSD 6AL, Timing Computer and Timing Control, so It needs a little more adjusting, which we'll do tomorrow.
The more Carb adjusting. SOUNDS AWESOME - This is me, Steve posting from EDS pc. THANKS ED and Paul for all your Help getting this running!!!!!What a day!!!!! |
|
#232
11-28-2010, 10:49 AM
|
||||
|
||||
|
We would have been a bit further along with the tuning if the police didn’t drop by and kindly ask us to shut it down. Didn’t realize it was after midnight, time to put a clock in the garages.
|
|
#233
11-29-2010, 09:18 PM
|
||||
|
||||
|
Thanks to Jeff(SHAKER455) for coming over and tuning this Dominator. Got it running better, and with a little more work will make this carb run great.
|
|
#234
12-11-2010, 12:19 AM
|
||||
|
||||
OOOPPS
Quote:
 Nice build!
__________________
PHILLYGOAT 1965 GTO/ OEM Block, Crank & D-ports(all slightly modified of course)/ 3550lbs/ Full Exhaust/ Foot Braking 1.41 60ft [email protected] [email protected](Pontiac Heaven)  More Details on GOAT http://www.pontiaczone.com/forum/vbpicgallery.php?do=view&g=379 GTO Burnout http://www.youtube.com/watch?v=nZqdcH0Ltc4 |
|
#235
12-11-2010, 06:47 PM
|
||||
|
||||
|
Here's "Foxie" just hanging out.
We installed the AED Throttle Assembly - It is a very nice piece. Worked perfect with the LOKAR Throttle Cable and LOKAR Pedal Assembly. I can finally REV the engine with my foot. Also got the Aluminum 4 Core Radiator, supposed to be able to keep cool a 1000 HP engine, I think I'm more than covered there. Also got my 16" K&N Drop Base Filter. |
|
#236
12-11-2010, 07:06 PM
|
||||
|
||||
|
Here is the Midnight Series Lokar Pedal Assembly.
Gauges are in and Working. B&M Shifter installed and functional. And Brighter Exhaust Pictures. Yes, I will be getting a NEW DRIVE-SHAFT, I'm looking at Denny's or Strange. |
|
#237
01-01-2011, 06:50 PM
|
||||
|
||||
|
Ed and I started the install of the "American AutoWire Classic Update Wiring Harness."
We got the Dash Harness installed and called it a night. So far Very nice Kit. Steve |
|
#238
03-19-2011, 10:34 AM
|
||||
|
||||
|
I received my SNOW PERFORMANCE METHANOL INJECTION KIT this week. Hoping this helps to avert Detonation. The kit was well packaged. I did find another company "Alcohol Injection Systems" which has a much better tank for the Methanol/water Mix, It looks like a fuel cell, I may get the tank from them, as the Pumps are the same.
|
|
#239
08-18-2011, 10:27 PM
|
||||
|
||||
|
SUPER 400 HOOD and Cowl panel almost ready to ship. Retro-Sound Radio to be delivered tomorrow.
|
|
#240
08-19-2011, 04:28 PM
|
||||
|
||||
|
Who's make'n the Super 400 again?
__________________
If you cant drive from gas pump to gas pump across the map, its not a street car. http://s207.photobucket.com/albums/b...hop/?start=100 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
