| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#41
05-13-2011, 09:51 PM
|
||||
|
||||
Unfortunately I was only able to make a hand full of 1/8 mile passes .
Typical 60ft times with RN converter were mid 1.6's and with ATI 1.60 & 1.61 . Both Converters flash to around 4000 give or take . Where I see the most Improvement is in 1/8 mi. et and Mph . About 2 tenths and 2 Mph ..ATI just feels locked up tighter and Accelerates harder . I really need to get out and make some 1/4 mi runs .
__________________
69 Grand Prix 428 H.O. loaded "J" 11.51 @ 116 |
|
#42
05-16-2011, 07:21 AM
|
||||
|
||||
|
Bernie
You should pick up more on the top with less slippage? Thats if the 3.73's are enough gear to keep a 8" tight?.. FWIW I was running 7.39 yesterday@ almost 92 and going out the door at upper 60's Track DA was close to 1600. I think Your SR will pull harder than my HR so u should see 50's or better. Where u shifting at?
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
