[PMD1969]

Anyone have a picture or know of one on the internet of #7 ?



What I have is a Camaro swivel for an automatic. I have resorted to making my own by straightening the arm out but I do not know the measurement of the arm. If someone knows the measurement of the arm it would be a BIG help.

Thanks

Marc

[jetallman]

I seen that part on my column shift car, I'll look through the pile tonight for it.

[Cammer-6]

is this what youre after?

[PMD1969]

Originally Posted by Cammer-6

is this what youre after?

That's the one. I was looking for the length of the other arm.
Thanks

[jetallman]

This is one of the two I have, couldn't find the other tonight, mine was a th400 column shift car

[PMD1969]

Here is what I have. What I have pounded out is an automatic swivel. I pounded the arm straight and now need the shorter measurement for the manual transmission.

http://i263.photobucket.com/albums/i...114_220154.jpg

[Sport69]

I don't understand why you pounded out the arm straight, was it to make it work on a 4-speed? If you need one of these swivels for the 4-speed I have one. If you're just looking for the measurements that'll be tough. Even the fairly straight arm has a slight bend in it. I'm sending you what I have, see if this helps. I also have the rod that runs from this swivel to the reverse linkage on a 4-speed muncie tranny.

[PMD1969]

Originally Posted by Sport69

I don't understand why you pounded out the arm straight, was it to make it work on a 4-speed? If you need one of these swivels for the 4-speed I have one. If you're just looking for the measurements that'll be tough. Even the fairly straight arm has a slight bend in it. I'm sending you what I have, see if this helps. I also have the rod that runs from this swivel to the reverse linkage on a 4-speed muncie tranny.

What is in the car is a three speed cast iron Saginaw. The reason that I straightened the bar is that another Cammer with a 69FB Sprint said that the bar was straight. The car that I got this one from was an automatic.

The bar I have (Camaro) is made from cheap steel and when heated it is very easy to manipulate. I am trying to get the right profile for it to work on this transmission. It appears that there are MANY profiles for these things.

I do appreciate the photos you provided.

[PMD1969]

Here is a picture of the manual swivel from another 69 Sprint. I am trying to figure out the measurement of the bar so I can cut and shape the one I have.

https://mail.google.com/mail/?ui=2&i...line&safe=1&zw

[Sport69]

Understood. I know what you mean about different styles, it seems that every time you turn around it's something new! Good Luck...

[PMD1969]

Originally Posted by Sport69

Understood. I know what you mean about different styles, it seems that every time you turn around it's something new! Good Luck...

The worst is/was that I have never seen one before an hour ago LOL ! so I have been working on it blindly. This 69FB year is really a tough one since it is a one off for everything. So far the help here at PY has been amazing. When I get something replaced/repaired or find some new info I'll post it to share. Finding info about some of these basic parts is very tough if not impossible. Of course I had to pick an extremely rare one off FB with a funky OHC engine haha.

I do enjoy the hunt for parts and learning ho to fix/install/repair this car.

[Sport69]

I really hear you brother on the 69! You've got one up on me with the Sprint, so i'll say an extra prayer for you tonight...