[David Brown]

Is the PYI38E horn button insert for 1970 wood wheel?

[goatwgn]

Column shifter shift handles for all years. The turn signal levers and the tilt levers are available, this would be a finishing touch for those of us with bench seats and column shifters.

[mrgto69]

Originally Posted by David Brown

Is the PYI38E horn button insert for 1970 wood wheel?

Yes it is... We have a bunch instock and they are $59 ea. Give us a call.

[David Brown]

Thanks for the horn button reply. My original has the spider cracks.

Does anyone make, or might we see rubber floor mats in other colors...mainly sandalwood, or whatever was the color for a sandalwood interior.

[Ccass]

Originally Posted by David Brown

Does anyone make, or might we see rubber floor mats in other colors...mainly sandalwood, or whatever was the color for a sandalwood interior.

Not the original style. PY has a similar aftermarket rubber mat that comes in various colors. If you want 'original' style, you need to spray dye a black set.

[Ben T.]

How about 69 GP Door Panels ,door handle cups or a radio that is not remote control . These are very hard to come by and no one makes them .

[Mark Martin]

For sure, the 1968 Pontiac full size arrowhead emblem. Nobody reproduces is and, when someone comes across one, they are an arm and a leg to purchase.

[67gtospud]

67 GTO full quarters. Or at the very least quarter patch panels that replace the entire wheel well opening

[pontiacry]

interior- seat covers for 65 tempest custom,radiator support,tail light lens,belt line trim.

[Blk12wls]

A SHORT DECK BLOCK version of the IAII!

[goatwgn]

Originally Posted by Blk12wls

A SHORT DECK BLOCK version of the IAII!

Great idea! As well as an IAII 195 4 cylinder.

[goatwgn]

Originally Posted by pontiacry

interior- seat covers for 65 tempest custom,radiator support,tail light lens,belt line trim.

Another good idea. Beltline moulding for '66-'67 Tempest Custom as well.

[Bob with the 66]

Ccass,

Is it true that new 66 full rear quarter panels are in process?

Not the current pieces that are out there today.

Very interested, Bob

Also is anyone thinking about producing the outside door and qtr stainless trim for post coupe cars?

I see hard top and convt. moldings are offered, not post cars.

[67cruiser]

How about original style 1967 gto Fuel inlet nuts for the Q-jet

[brut4s]

17" and 18" Rally 1 wheels!

[1972grandprix455]

a gas tank for 1971-1972 grand prix

[71ModelJ]

Originally Posted by 1972grandprix455

a gas tank for 1971-1972 grand prix

I hear that ditto

[Mjohnson23]

I'm still waiting on a 71/72 Grand Prix rear bumper license plate filler to be available. Really need that one for my car.

[mrgto69]

Each time this request comes up, I just shake my head... I know these license plates are needed for the 71-72 GP's along with the gas tank, lower front bumper filler, hood pad, vinyl top trim pot metal corners, door panels, etc... The only way these parts will be made is if the 69-70 GP guys make purchases of the parts that have been requested to be made and the mfg see the parts they invested in are moving well. Have your 69-70 GP buddies purchase these parts... like the hood pad, license plate pocket, vinyl top pot metal corners, etc. The fellow that made the 69-70 pocket already has the 71-2 license plate digitally made. All he is now waiting for is to break even and they 71-72 will probably be made. (he has a 69 & a 71 GP, so you know he's itching to make this)The 71-72 hood pad is also digitally made, so that's in the same boat as these pockets... Now it's up to the GP guys to do their digilance. GP Mike

[deJudge]

How about correctly plated upper chrome vents for 69 GTOs. Only one I've seen are for 70s that have just the chrome edge