[harry k]

Originally Posted by Cliff R

Lots of good information on this thread, even with the "negative" attitude and comments overshadowing it by the OP. I never once had a problem with how the test was done, why it was done, or that it was done for any other reason than to optimize what the customer had and was able to supply within his budget.

I saw some SERIOUS flaws in some of the parts used which would have a significant negative impact on the test results, so ran my own thread to point these out. This was done solely to educate folks about these things, not to criticize the OP, his work, methods, or anything else of that sort. Folks, I spend more time at optimizing "stock" parts than most, as we are DIRECTY involved with some of the fastest Pontiac powered cars out there using them. I knew that a 1/2" spacer/adapter is REQUIRED to clear the throttle plates with the AFB clone carburetors, in addition to a pretty serious miss-match between the parts once it's in place.

Cliff

"I wanted to stay off Harry K's thread so it doesn't sound like I'm picking on him or being critical of his testing, which I am not"
Why are you back here? you just cannot help yourself when someone in here posts results that are not in your best interest ,,,,just admited

Why is that you and only and bunch of newbie followers of yours have to attack my threads? HUH , every friking time i post something in here once in a while, you are the one attacking my credence
and for the sake of whole PY site, you have done this in a "book writing skills" with many others in here
you just cannot help yourself that there are many others in this site that have knowledge & opinions different than yours ...

from now on i will not take your replys lightly anymore towards my threads that i start them as i said initialy in my post#1.

Just to show other's there there was no serious flaws as well as hes painting the picture, i took the extra time to demonstrate what was used AND THE PIC TALKS ITSELF.