| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
11-06-2015, 08:31 AM
|
|||
|
|||
Need to redo brakes on SD. Parts questions
Need to redo entire brake system on 74 SD. Whose parts are quality? What fluid are guys using? Thanks Bob.
|
|
#2
11-07-2015, 09:40 PM
|
|||
|
|||
|
I used an AC Delco master cylinder. I would recommend you stay away from Cardone. I went through 3 new master cylinders in 2 weeks before I went with the AC Delco. I use Prestone Dot 3 brake fluid. I have had no problem with Wagner brake parts.
|
|
#3
11-08-2015, 04:29 AM
|
||||
|
||||
|
Replace the 3 rubber brake hoses. Delco made in china available at rock auto.
Dot 3 was factory installed in all makes and models for decades. I don't see any reason to change.
__________________
Bull Nose Formula-461, 6x-4, Q-jet, HEI, TH400, 8.5 3.08, superslowjunk |
|
#4
11-08-2015, 03:38 PM
|
|||
|
|||
|
I figured everything made overseas.That's why I asked. Probably go to local NAPA.
|
|
#5
11-27-2015, 08:37 PM
|
||||
|
||||
|
Bob, does your car have the original master cylinder with the two bleeder screws? If so I would send it out to White Post Restorations to have them rebuild and sleeve it if necessary. They did an awesome job on the original master cyl on my car. They can also do the rear wheel cylinders, too if you are looking to keep all your original pieces intact.
http://forums.maxperformanceinc.com/...itepost&page=9 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
