| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-17-2016, 07:24 AM
|
||||
|
||||
oil drain lines
Hello
Does anybody have pictures of external oil drain lines from round port e-heads. I also would be interested in where you went into the pan. Thanks Vince |
|
#2
04-17-2016, 09:21 AM
|
||||
|
||||
|
couple pics in a stock frame 69 abody. You will probably need to mock it up to see where you can go into the pan with the headers you have. Bigger line the better...these are no 10.
__________________
 1963 Cat SD Clone (old school) streeter 1964 GTO post coupe, tripower, 4speed (build) 1965 GTO 389 tripower, 4 speed, driver 1966 GTO dragcar 1966 GTO Tri power, 4speed, barn find 1966 GTO Ragtop 1969 GTO Judge RA lll, auto 1970 GP SSJ 1970 GTO barn find..TLB…390 horse?….yeh, 390 1973 Grand Safari wagon, 700hp stoplight sleeper 525ci DCI & 609ci LM V head builds Factory stock oval track car |
|
#3
04-17-2016, 11:05 AM
|
||||
|
||||
|
So do you have a "Dam" to direct the oil to the drain hose fitting JC?
The early E-heads are easy as they have a pocket below the valve cover surface where the rear head bolt goes. Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#4
04-17-2016, 11:41 AM
|
||||
|
||||
|
Not much room on the rear of the head from what I can see. I was thinking the same spot as JC?
|
|
#5
04-17-2016, 11:41 AM
|
||||
|
||||
|
I'll post pictures in a little bit
__________________
EHTTFMF!  Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
|
#6
04-17-2016, 12:45 PM
|
||||
|
||||
|
Here's what we have.
__________________
 Boobs & bacon 
|
|
#7
04-17-2016, 12:58 PM
|
||||
|
||||
|
I can't get the other side pic to upload!
 Brian
__________________
Boobs & bacon
|
|
#8
04-17-2016, 01:13 PM
|
|||
|
|||
|
OIL DRAIN
heres my setup
|
|
#9
04-17-2016, 01:19 PM
|
|||
|
|||
|
oil drain
other side
|
|
#10
04-17-2016, 01:43 PM
|
||||
|
||||
|
Thanks everyone for posting the pictures.
Vince |
|
#11
04-17-2016, 07:08 PM
|
||||
|
||||
|
Do you'll run diapers?
My diaper hugs the pan pretty tight at rail....
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#12
04-17-2016, 07:16 PM
|
||||
|
||||
|
I just used Swageloc fittings: 90 degree 1/2" id out of the heads, 1/2" hard tubing to the oil pan and 1/2" 90 degree fittings screwed into welded bungs in a custom steel oil pan.
http://www.swagelok.com/en/product/F...-Tube-Adapters Working with aeroquip parts take up a lot of space needed on a clutch car. Tom V. There isn't a lot of oil that gets to the valve covers with Smith Brothers .080" restricted pushrods.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#13
04-17-2016, 11:54 PM
|
||||
|
||||
|
Quote:
__________________
Come take a ride http://www.youtube.com/watch?v=P7Y8Awfk2I0 2008, 2013, 2015, 2016, 2019 Central Il Dragway Mod track champion and 2015 IHRA Div 5 Mod champion 2024 Chief of the Pontiacs 
|
|
#14
04-18-2016, 06:27 AM
|
||||
|
||||
|
Quote:
|
|
#15
04-18-2016, 06:55 AM
|
||||
|
||||
|
Diaper
Okay now I have to ask what brand diaper are you guys using?
|
|
#16
04-18-2016, 07:03 AM
|
||||
|
||||
|
DRE diaper, Dennis is great to work with.
__________________
|
|
#17
04-18-2016, 08:00 AM
|
||||
|
||||
|
DRE. Dennis is great to deal with! 👍
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
|
#18
04-18-2016, 08:35 AM
|
||||
|
||||
|
Quote:
I run the restrictive push rods, seem to do ok. I've thought about hard lines but I'd be concerned about vibration and fatigue.
__________________
https://www.facebook.com/Outlaw-Vint...7899333725868/ |
|
#19
04-18-2016, 08:38 AM
|
||||
|
||||
|
DRE here also. Fits pretty good. I don't know how I'm going to change the oil but it does fit well.
__________________
Come take a ride http://www.youtube.com/watch?v=P7Y8Awfk2I0 2008, 2013, 2015, 2016, 2019 Central Il Dragway Mod track champion and 2015 IHRA Div 5 Mod champion 2024 Chief of the Pontiacs
|
|
#20
04-18-2016, 01:02 PM
|
||||
|
||||
|
Fabricate a aluminum containment pan. Lots more room and a lot easier to work on
__________________
EHTTFMF! Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
