Pontiac - Race The next Level

          
Closed Thread
 
Thread Tools Display Modes
  #1461  
Old 09-23-2016, 05:09 PM
69Goat1's Avatar
69Goat1 69Goat1 is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Tahlequah Oklahoma
Posts: 3,079
Default

Quote:
Originally Posted by T Syron View Post
Not basement at my weight.
Well whatever it is I am sure the ET/MPH will match the dyno so again - Great Job!

__________________
1969 GTO, 5.77 @ 121 1/8th mile 3450 lbs...535 with Junk dinosaur Eheads
Faster on nitrous…
  #1462  
Old 09-23-2016, 05:09 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by 69Goat1 View Post
Yessir - 11:1... I broke the block on the highway 1 mile from our house...
... so you're 11.0 to 1, 462c.i. with ported std pushrod EHeads correct ?? ...

... 3400lbs n/a and you run 9.70's ?? ... what mph ???

  #1463  
Old 09-23-2016, 05:12 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by 69Goat1 View Post
All I know is "Bill" was a bunch faster before the CV-1 heads and was pretty bummed out about the whole deal. He was also building a bunch of blowby because it was a real mosquito killer. He ran 10 teens with a 400 CI with Eheads in the same car. Pretty sure it never went faster than that at 535 CI and blown...
... you mean this guy correct ??? ...

http://forums.maxperformanceinc.com/...r.php?u=145495

  #1464  
Old 09-23-2016, 05:14 PM
69Goat1's Avatar
69Goat1 69Goat1 is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Tahlequah Oklahoma
Posts: 3,079
Default

Quote:
Originally Posted by 65nss4spdGTO View Post
You ran that fast in the heat at Norwalk?

So just to be clear here, you are claiming you can make 850HP NA (Pontiac) with standard port E-heads or were you planning on using the blower?

Calvin Hill
Hill Performance
708-250-7420
Never been to Norwalk but ran 9.90's at Tulsa in July on 107 degree day with a DA of about 6500 feet. I laugh everytime you guys mention how hot it was at Norwalk... LOL

80's LOL

The blower makes it over 850 right now (quite a bit more)

850 would be NA - never said it would be standard port. Said I would either send them to SD or use wideports...

__________________
1969 GTO, 5.77 @ 121 1/8th mile 3450 lbs...535 with Junk dinosaur Eheads
Faster on nitrous…
  #1465  
Old 09-23-2016, 05:15 PM
69Goat1's Avatar
69Goat1 69Goat1 is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Tahlequah Oklahoma
Posts: 3,079
Default

Quote:
Originally Posted by Anderson Port Development View Post
... you mean this guy correct ??? ...

http://forums.maxperformanceinc.com/...r.php?u=145495
Yup

__________________
1969 GTO, 5.77 @ 121 1/8th mile 3450 lbs...535 with Junk dinosaur Eheads
Faster on nitrous…
  #1466  
Old 09-23-2016, 05:17 PM
69Goat1's Avatar
69Goat1 69Goat1 is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Tahlequah Oklahoma
Posts: 3,079
Default

Quote:
Originally Posted by Anderson Port Development View Post
... so you're 11.0 to 1, 462c.i. with ported std pushrod EHeads correct ?? ...

... 3400lbs n/a and you run 9.70's ?? ... what mph ???
Right at the 139.8 - 140 mark...

314 whole cfm...

__________________
1969 GTO, 5.77 @ 121 1/8th mile 3450 lbs...535 with Junk dinosaur Eheads
Faster on nitrous…
  #1467  
Old 09-23-2016, 05:20 PM
69Goat1's Avatar
69Goat1 69Goat1 is offline
Ultimate Warrior
 
Join Date: Jul 2003
Location: Tahlequah Oklahoma
Posts: 3,079
Default

Oh BTW - gotta go so you guys are just going to have to play with yourselves now...

__________________
1969 GTO, 5.77 @ 121 1/8th mile 3450 lbs...535 with Junk dinosaur Eheads
Faster on nitrous…
  #1468  
Old 09-23-2016, 05:26 PM
65nss4spdGTO's Avatar
65nss4spdGTO 65nss4spdGTO is offline
Ultimate Warrior
 
Join Date: Apr 2006
Posts: 3,339
Default

Quote:
Originally Posted by 69Goat1 View Post
850 would be NA - never said it would be standard port. Said I would either send them to SD or use wideports...
Thanks for clearing that up, maybe you can just pay your guy $600 and get twice the airflow out of the E-heads?

So you would still be a good 75HP behind my KRE HP's. I don't use E-heads as wide ports as I see no reason to. When a customer is looking at upgrading from standard port heads, I go straight to the KRE HP's. The head has greater potential, more chamber options and they don't require the timing of an E-head.

Calvin Hill
Hill Performance
708-250-7420

  #1469  
Old 09-23-2016, 05:54 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by 69Goat1 View Post
All I know is "Bill" was a bunch faster before the CV-1 heads and was pretty bummed out about the whole deal. He was also building a bunch of blowby because it was a real mosquito killer. He ran 10 teens with a 400 CI with Eheads in the same car. Pretty sure it never went faster than that at 535 CI and blown...
... well you are pretty wrong, as we just got off the phone with "Bill Hamilton" just now and he said that the car ran 10.50's with his CNC 330cfm E-Headed 455, and this is his 3800lbs firebird we're talking about, and he also said the car was heavier with the 541c.i. combo to the tune of 4000lbs ...

... and with the new combo went 10.20's even with all the blowby issues, which Bill did mention how bummed he was about how the new combo not seal ing the rings up properly, but he did not have issues with his CV-1's as you've made it sound like, Bill never got the combo sealed up before he put it in a different car ...

... so obviously your statements about Bill Hamilton's results were certainly not accurate ...

  #1470  
Old 09-23-2016, 05:55 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by TimeWarp View Post
Not every one, but a number of them. Reason? Because that seems to be the mentality of some over here too. And its been rampant for too long. It doesn't belong here. If you like it there is plenty of band width over there.
You're the one that knows all about it and is trolling everybody in this thread that doesn't agree with you. I think you should play hide and go Fxxk your self.

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #1471  
Old 09-23-2016, 06:20 PM
TimeWarp TimeWarp is offline
Suspended
 
Join Date: Sep 2014
Location: west chester, PA
Posts: 266
Default

Quote:
Originally Posted by mike leech View Post
You're the one that knows all about it and is trolling everybody in this thread that doesn't agree with you. I think you should play hide and go Fxxk your self.
You call THIS trolling? LMAO. Too funny.

  #1472  
Old 09-23-2016, 06:30 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by TimeWarp View Post
You call THIS trolling? LMAO. Too funny.
Yes YOU are a troll.

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #1473  
Old 09-23-2016, 06:42 PM
PAUL K's Avatar
PAUL K PAUL K is offline
Ultimate Warrior
 
Join Date: Feb 2004
Location: Sugar Grove IL USA
Posts: 7,439
Default

Quote:
Originally Posted by mike leech View Post
You're the one that knows all about it and is trolling everybody in this thread that doesn't agree with you. I think you should play hide and go Fxxk your self.
X 2!!!

__________________
Go fast, see Elvis!
www.facebook.com/PaulKnippensMuscleMotors
  #1474  
Old 09-23-2016, 06:43 PM
PAUL K's Avatar
PAUL K PAUL K is offline
Ultimate Warrior
 
Join Date: Feb 2004
Location: Sugar Grove IL USA
Posts: 7,439
Default

Quote:
Originally Posted by mike leech View Post
Yes YOU are a troll.
^^^Truth^^^

__________________
Go fast, see Elvis!
www.facebook.com/PaulKnippensMuscleMotors
  #1475  
Old 09-23-2016, 07:49 PM
Half-Inch Stud's Avatar
Half-Inch Stud Half-Inch Stud is offline
Ultimate Warrior
 
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,890
Default Rules for handling internet trolls

https://m.youtube.com/watch?v=vjmBQZNG8L0


and when you're done, we'll all hug and play hide and go...


Last edited by Half-Inch Stud; 09-23-2016 at 08:17 PM.
  #1476  
Old 09-23-2016, 07:50 PM
TimeWarp TimeWarp is offline
Suspended
 
Join Date: Sep 2014
Location: west chester, PA
Posts: 266
Default

Thats hilarious. Especially from you two. I'm going to play a violin for you at some point. If I remember to.

  #1477  
Old 09-23-2016, 07:58 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by TimeWarp View Post
Thats hilarious. Especially from you two. I'm going to play a violin for you at some point. If I remember to.
You are too obvious in your attempts to coherence the moderators to "make sure you can dream whatever you want without having to hear any opposition to your facts."

You obviously want the race section as your safe space to protect what you without any hurtful truth tellers.

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.

Last edited by mike leech; 09-23-2016 at 08:05 PM.
  #1478  
Old 09-23-2016, 08:07 PM
TimeWarp TimeWarp is offline
Suspended
 
Join Date: Sep 2014
Location: west chester, PA
Posts: 266
Default

Not at all. Just putting things back into perspective after your 7 year reign of BS. Nothing I've said is untrue. Oh, and the word is "coerce". But I shouldn't have to coerce a moderator to do the job they are asked to do.

  #1479  
Old 09-23-2016, 08:15 PM
dragracerx2813's Avatar
dragracerx2813 dragracerx2813 is offline
Chief Ponti-yacker
 
Join Date: Aug 2016
Location: Orange Park Fl
Posts: 540
Default

Quote:
Originally Posted by TimeWarp View Post
Not at all. Just putting things back into perspective after your 7 year reign of BS. Nothing I've said is untrue. Oh, and the word is "coerce". But I shouldn't have to coerce a moderator to do the job they are asked to do.
Great now we are correcting spelling !

  #1480  
Old 09-23-2016, 08:20 PM
TimeWarp TimeWarp is offline
Suspended
 
Join Date: Sep 2014
Location: west chester, PA
Posts: 266
Default

lol You're offended by a spelling correction, but not someone telling another person to go F**k themselves? Interesting.

Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:21 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017