[Pontiac_Defender]

THE CAR IS EXTREMELY RUSTY. LOCATED IN PLAINFIELD, WI

I WILL ADD TO THIS LIST AS I PULL PARTS.

- 1967 Black dash pad. There are no cracks. There does appear to be some adhesive left on it where something was stuck on. Correct for Bonneville and Grand Prix but would work for other b body cars of 67. Will also work for 68 but will cover the vin. Would prefer pickup. $400

- 1967 Grand Prix header panel. Would be the same for Catalina and Ventura. Would also work for Bonneville and 2+2 but you would need to drill holes for the emblems. $65 + shipping.

- 1967 Grand Prix Drivers Side headlight extension. As you can see there was a repair on the back side where it was filled up with some bondo. Didn't notice until I took it off the car. Comes with the lens and housing as pictured. $25 + shipping.

- 1967 Grand Prix only headlight extension filler pieces. These mount on the outer ends of the core support. $20 + shipping.

- 1967 Grand Prix quarter panel letter set. No broken studs. Some are in better shape than some others. This is for RH & LH letters. $40 + shipping.

- 1967 Door hinges (pair) $40 + shipping.

- 1967 Grand Prix tail lights. Not perfect, need cleaning, I did notice a crack in each. Comes with the housings. $60 + shipping for the pair.

- 1967 B body bucket seats. Great cores for restoration. Would prefer these be picked up. $500 for the pair.

Engine/trans will be available at a later date. I haven't pulled it yet. This car did run and was driven on to my trailer last weekend. I'll post the code later. If I recall it's XH with 670 heads AFB w/ 400 trans. $1,500 for everything.

Other parts will be available as I get to them. Thanks again for looking!

[Pontiac_Defender]

MORE PICS...

[67catGP]

Does it have power and tinted windows? If so, looking for the left door window and regulator.

[Pontiac_Defender]

Originally Posted by 67catGP

Does it have power and tinted windows? If so, looking for the left door window and regulator.

It does have tinted windows. I would like to try and sell all the glass together once I get it out. I know the windshield is bad. The power window regulators I plan to keep for my cars.

Dave

[Mrpontiac1013]

Need those 2 corner pieces that look like boomerangs that mount next to taillights on the rear quarter panels and how nice is the door panels with the housing that holds the window switches and the steering wheel condition Demond call anytime thanks 6185816656

[Pontiac_Defender]

Originally Posted by Mrpontiac1013

Need those 2 corner pieces that look like boomerangs that mount next to taillights on the rear quarter panels and how nice is the door panels with the housing that holds the window switches and the steering wheel condition Demond call anytime thanks 6185816656

Those corner pieces you mentioned are sold. The door panels are junk. The armrests are junk. The plastic pieces looked ok. Steering wheel isn't the best. I'll try and get pics once I get it off.

[Mrpontiac1013]

Ok thanks

[GpFreak]

How bad (or good) is that left front fender? Stick on or bolt on side molding?

[Pontiac_Defender]

Originally Posted by GpFreak

How bad (or good) is that left front fender? Stick on or bolt on side molding?

Fenders are junk. Stick on molding. Thanks!

Dave

[vader87]

I have bought tons of parts from Pontiac_Defender and I have never been disappointed! Super fast shipping as well!

[theblurrrr]

I'd be interested in the fuse block, bulkhead connector and as much of the associated wiring as possible.

[theblurrrr]

Does this car have the factory outside remote control mirror?

[Pontiac_Defender]

Originally Posted by theblurrrr

I'd be interested in the fuse block, bulkhead connector and as much of the associated wiring as possible.

I believe you contacted me through eBay regarding the fuse block ect... Weather permitting I'll work on getting that out this upcoming week. Thanks! Dave

[Pontiac_Defender]

Originally Posted by theblurrrr

Does this car have the factory outside remote control mirror?

It did but that already sold. Sorry.
Dave

[Passionate Poncho I]

I'm looking for a '63 Pontiac radio knob in nice condition with all chrome in good shape. Let me know - Dennis, Kansas City

[Pontiac_Defender]

Here are some pics

Originally Posted by theblurrrr

I'd be interested in the fuse block, bulkhead connector and as much of the associated wiring as possible.

[Pontiac_Defender]

And a couple more....

Originally Posted by theblurrrr

I'd be interested in the fuse block, bulkhead connector and as much of the associated wiring as possible.

[Car kid71]

Hello, I have a 67 grand prix ht. I need the driver door glass, rear window molding (inside), I need the temp control assembly (with a/c). Let me know if you have these parts. Thx
Kevin Horner
704-718-8349

[theblurrrr]

Hi!
I just wanted to tell you that I don't have the glass or interior rear window moldings you referenced.
I might have the heater/AC control you need but you will have to specify if you are looking for the "standard" or "ATC" type of controller. If it's the Automatic Temperature Control type, I don't have it.

Hope this helps.

[vasquezrico]

Just wanting to know if you have rear quarter panel for drivers side thx