Pontiac - Race The next Level

          
Reply
 
Thread Tools Display Modes
  #141  
Old 06-16-2018, 09:40 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by chiefbigb View Post
I feel the rocker bosses should be solid across/tied together. Possible fracture points in my opinion. Would also help support your spring pockets.
... Dick Fulton has over 1200lbs of spring pressure and we turn that engine close to 9000rpm, and have done so for a ton of dyno pulls and runs down the track which he's won multiple events in his class, it still has the same heads, the same shaft system, the same springs and the same pushrods, with zero issue ...

__________________
"DON'T BE A CV-1 HATER... IT JUST MAKES YOU LOOK STUPID"
  #142  
Old 06-16-2018, 10:01 PM
JSPONT's Avatar
JSPONT JSPONT is offline
Ultimate Warrior
 
Join Date: Jul 2014
Location: ROCKY POINT NY
Posts: 2,917
Default

What compression will Chiefs motor be? What is the combustion chamber cc? How big are the runners , They look pretty big compared to the tiger runner. What did they flow? I was just trying to see how much he is stepping up. Do you know the cubic inch it will be?
You said ask away!!

  #143  
Old 06-16-2018, 10:37 PM
chiefbigb chiefbigb is offline
Ultimate Warrior
 
Join Date: Dec 2003
Location: richmond va usa
Posts: 1,534
Default

That's good. Just a observation from a consumer.

__________________
Be carefull of the feet you step on today.They may be attached to the a$$ you kiss tomorrow.
  #144  
Old 06-16-2018, 11:34 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by chiefbigb View Post
That's good. Just a observation from a consumer.
... ...

__________________
"DON'T BE A CV-1 HATER... IT JUST MAKES YOU LOOK STUPID"
  #145  
Old 06-16-2018, 11:40 PM
Anderson Port Development's Avatar
Anderson Port Development Anderson Port Development is offline
Ultimate Warrior
 
Join Date: Apr 2016
Posts: 1,055
Default

Quote:
Originally Posted by JSPONT View Post
What compression will Chiefs motor be? What is the combustion chamber cc? How big are the runners , They look pretty big compared to the tiger runner. What did they flow? I was just trying to see how much he is stepping up. Do you know the cubic inch it will be?
You said ask away!!

... ok, well i can not get into the details of Chief's compression or other key elements of his engine like that, but the other information has obviously been posted before this about the CV-330 heads, the runner volume is 330cc's, and that port will flow a little over 450cfm with a 2.320 valve ...

... the biggest area Chief will be stepping up will be in the CSA advantage, valve CSA advantage and the airflow advantage the CV-1's offer, which is some of the key limitations of the E-Heads ...

... hopefully i've answered appropriately ...

__________________
"DON'T BE A CV-1 HATER... IT JUST MAKES YOU LOOK STUPID"
  #146  
Old 06-17-2018, 12:01 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

CI would be nice!



GTO George

  #147  
Old 06-17-2018, 12:49 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Just to beat a dead horse and to prove I don't exaggerate here are some photos from chief 2 races with Ryan.......just saying they speak for them selves! OK I'm done!


GTO George
Attached Thumbnails
Click image for larger version

Name:	IMG_0535.jpg
Views:	105
Size:	69.3 KB
ID:	485521   Click image for larger version

Name:	IMG_0536.jpg
Views:	102
Size:	54.5 KB
ID:	485522   Click image for larger version

Name:	IMG_0537.jpg
Views:	112
Size:	40.2 KB
ID:	485523  

  #148  
Old 06-17-2018, 09:17 AM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

You're the one beating the dead horse george!! We all know he got beat by a fender!


So the only thing you just proved is Chiefs car is competitive and that YOU like to argue.....

__________________
My Half AN Injun.....
  #149  
Old 06-17-2018, 09:36 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Quote:
Originally Posted by charlie66 View Post
You're the one beating the dead horse george!! We all know he got beat by a fender!


So the only thing you just proved is Chiefs car is competitive and that YOU like to argue.....
Ok you whatever you say! I have to go work on my race car and motor home!
It was a discussion!
Actually I NEVER said he isn’t competitive, it is only an 1/8 mile race. He just isn’t going to be the quickest anymore........the new engine!!

GTO George


Last edited by GTOGEORGE; 06-17-2018 at 09:49 AM.
  #150  
Old 06-17-2018, 10:07 AM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

Quote:
Originally Posted by GTOGEORGE View Post
Ok you whatever you say! I have to go work on my race car and motor home!
It was a discussion!
Actually I NEVER said he isn’t competitive, it is only an 1/8 mile race. He just isn’t going to be the quickest anymore........the new engine!!

GTO George
481TTFMF!!!

__________________
My Half AN Injun.....
  #151  
Old 06-17-2018, 10:28 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Quote:
Originally Posted by charlie66 View Post
481TTFMF!!!
You’re funny!
BCTTF!



GTO George

  #152  
Old 06-17-2018, 10:48 AM
BruceWilkie BruceWilkie is offline
Ultimate Warrior
 
Join Date: Nov 2003
Location: Murfreesboro TN
Posts: 9,132
Default

Quote:
Originally Posted by Dragncar View Post
.....1
Looks nice. The intake, from the pics looks like it has straight runners. That little twist the CV heads have on the intake port, has it been taken out on Chiefs heads ?
Or is it hard to tell from the picture ?
More to runner shape than straight path. Even flow more important than straight appearance. All heads have turns in the port. The airfow doesn't know it's orientation, just wants easiest path. View of ports from the cylinder is more revealing than elsewhere...any head.

  #153  
Old 06-17-2018, 10:57 AM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

Quote:
Originally Posted by GTOGEORGE View Post
You’re funny!
BCTTF!



GTO George
Its all in good fun ..

George , i have a question for you. If chief ran 11psi just like you , who would win in a drag race at a track him or you...?

Im not trying to start anything. I sincerely would like to know......

__________________
My Half AN Injun.....
  #154  
Old 06-17-2018, 11:08 AM
GTOGEORGE's Avatar
GTOGEORGE GTOGEORGE is offline
Suspended
 
Join Date: Mar 2003
Location: South Rockwood, MICHIGAN
Posts: 8,884
Default

Quote:
Originally Posted by charlie66 View Post
Its all in good fun ..

George , i have a question for you. If chief ran 11psi just like you , who would win in a drag race at a track him or you...?

Im not trying to start anything. I sincerely would like to know......

Good question, my car it around 600-700 or so pounds heavier....so I guess he would.


GTO George

  #155  
Old 06-17-2018, 11:09 AM
Kevspontiacs@aol.com's Avatar
[email protected] Kevspontiacs@aol.com is offline
Chief Ponti-yacker
 
Join Date: Sep 2010
Location: nitro alley, il
Posts: 845
Default

Hey George we need a picture from the starting line to see if they left at the same time. If we could get a reaction time that would even be better. Because we all know a little bit at the hit means a gap on the big end

  #156  
Old 06-17-2018, 11:13 AM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

Quote:
Originally Posted by GTOGEORGE View Post
Good question, my car it around 600-700 or so pounds heavier....so I guess he would.


GTO George
Its a shame chief dont come around here anymore. I bet he'd add some wieght and give you a race ! hahaha

__________________
My Half AN Injun.....
  #157  
Old 06-17-2018, 11:29 AM
LiL Jack's Avatar
LiL Jack LiL Jack is offline
Ultimate Warrior
 
Join Date: Sep 2002
Location: Millersville,MD. USA
Posts: 8,522
Default

Quote:
Originally Posted by charlie66 View Post
Its a shame chief dont come around here anymore. I bet he'd add some wieght and give you a race ! hahaha
He wasn’t able to post

Mods are working on it

__________________
First Pontiac powered street car in the 7's

[email protected]. 3460#s
  #158  
Old 06-17-2018, 11:46 AM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

Quote:
Originally Posted by LiL Jack View Post
He wasn’t able to post

Mods are working on it
Ohh , Maybe when it gets fixed things will get more interesting....

__________________
My Half AN Injun.....
  #159  
Old 06-17-2018, 01:11 PM
Kevspontiacs@aol.com's Avatar
[email protected] Kevspontiacs@aol.com is offline
Chief Ponti-yacker
 
Join Date: Sep 2010
Location: nitro alley, il
Posts: 845
Default

Turn the naysayers to *ss kissers is my guess Lol

  #160  
Old 06-17-2018, 01:29 PM
charlie66's Avatar
charlie66 charlie66 is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 3,456
Default

lol! yup!

__________________
My Half AN Injun.....
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:54 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017