[Hillard]

Looking to see if anyone has a hydraulic roller cam they are not using. Something in the 230 - 240 @ .050 range and .500 to .550 lift.

I'm doing something I wouldn't normally do, but I'm throwing together a motor full of junk and mismatched parts I have laying around. Cam and carb are the only things I don't have so I'm not being picky. Whatcha got?

[Hillard]

On second thought, I'd consider a flat tappet (hyd or solid) also.

[PontiacMatt72]

I have a healthy hydraulic flat tappet cam (used but in good condition) and a brand new set of the good comp lifters (with the oil hole in the lifter face). I think it’s around 260 duration @.050 though. If you’re interested I can get more info.

[Hillard]

Originally Posted by PontiacMatt72

I have a healthy hydraulic flat tappet cam (used but in good condition) and a brand new set of the good comp lifters (with the oil hole in the lifter face). I think it’s around 260 duration @.050 though. If you’re interested I can get more info.

Thanks, but I'm guessing with that much duration it has a good amount of lift also which probably won't give me enough piston to valve clearance with the stock pistons. I appreciate the offer though.

[69FIREBIRD76MM]

I got used hyd. Flat comp cams 51-316-4 , with comp magnum lifters, few street miles and few quater mile passes, was in my 455 trw's, #62's heads no PTV.

[Hillard]

Originally Posted by 69FIREBIRD76MM

I got used hyd. Flat comp cams 51-316-4 , with comp magnum lifters, few street miles and few quater mile passes, was in my 455 trw's, #62's heads no PTV.

pm sent

[69FIREBIRD76MM]

Pm replied.

[Hillard]

Still looking.

[Hillard]

Going to use a cam my dad found. Thanks for all the responses.