Pontiac - Street No question too basic here!

          
Reply
 
Thread Tools Display Modes
  #1  
Old 04-12-2019, 09:05 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default Pontiac Timing Cover Without Indicator

I have one of those timing covers that didn't have the timing marks on it. Previous owner bought it NOS from a warehouse.

Does anyone know a source for the bolt on timing indicator for this Pontiac timing cover?

  #2  
Old 04-12-2019, 09:17 AM
400 Lemans's Avatar
400 Lemans 400 Lemans is offline
Chief Ponti-yacker
 
Join Date: Dec 2007
Posts: 587
Default

https://www.frankspontiacparts.com/e...ngineparts.htm

  #3  
Old 04-12-2019, 09:26 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by 400 Lemans View Post
Thanks.
Not seeing anything that would work and available on that page.

  #4  
Old 04-12-2019, 09:27 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

This is for a Pontiac 400. Not the Olds 403.

  #5  
Old 04-12-2019, 09:30 AM
rustedgoat rustedgoat is offline
Chief Ponti-yacker
 
Join Date: Nov 2004
Location: NJ
Posts: 822
Default

Does the separate timing tab make this a 1976 and up cover on all style bodies (A, F, G...)?

__________________
"Honestly the car will only be there for a few weeks, OK maybe a month at the most"
  #6  
Old 04-12-2019, 09:32 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by rustedgoat View Post
Does the separate timing tab make this a 1976 and up cover on all style bodies (A, F, G...)?
Not sure on that. Deciding whether or not to just make one if it's not available.
I've been searching online and it's not an easy find.

  #7  
Old 04-12-2019, 09:38 AM
STEELCITYFIREBIRD's Avatar
STEELCITYFIREBIRD STEELCITYFIREBIRD is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: "STEELER COUNTRY"
Posts: 2,965
Default

https://www.ramairrestoration.com/po...indicator.html

  #8  
Old 04-12-2019, 09:40 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by STEELCITYFIREBIRD View Post
That would work. If I can't find the factory one then I'm going to make one.
Thanks.

  #9  
Old 04-12-2019, 09:46 AM
rustedgoat rustedgoat is offline
Chief Ponti-yacker
 
Join Date: Nov 2004
Location: NJ
Posts: 822
Default

it just might be a part people really don't list to sell but, these guys and others are always parting out cars.

alex s
scott thelander
thepontiacman
warchief400

that ramairrestorations one does look nice

__________________
"Honestly the car will only be there for a few weeks, OK maybe a month at the most"
  #10  
Old 04-12-2019, 09:54 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by rustedgoat View Post
it just might be a part people really don't list to sell but, these guys and others are always parting out cars.

alex s
scott thelander
thepontiacman
warchief400

that ramairrestorations one does look nice
Thanks. It's a rare part these days.
The ram air restorations one does look nice. I'm thinking about making a flat one with some marks on it.

  #11  
Old 04-12-2019, 09:56 AM
STEELCITYFIREBIRD's Avatar
STEELCITYFIREBIRD STEELCITYFIREBIRD is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: "STEELER COUNTRY"
Posts: 2,965
Default

I believe most are integral to the cover, don’t know about pre 68 stuff though.

  #12  
Old 04-12-2019, 10:01 AM
77 TRASHCAN's Avatar
77 TRASHCAN 77 TRASHCAN is offline
Ultimate Warrior
 
Join Date: Oct 2008
Location: 31May2013 Temporary home to the world's widest (that we know of) tornado. Lord, NO more Please...
Posts: 6,750
Default

Quote:
Originally Posted by STEELCITYFIREBIRD View Post
I believe most are integral to the cover, don’t know about pre 68 stuff though.
The cover in question is likely for the 400's with the "hub" only balancer or a 265/301. Both these engines had their own unique bolt on timing tabs...

__________________
1977 Black Trans Am 180 HP Auto, essentially base model T/A.
I'm the original owner, purchased May 7, 1977.

Shut it off
Shut it off
Buddy, I just shut your Prius down...
  #13  
Old 04-12-2019, 10:01 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by STEELCITYFIREBIRD View Post
I believe most are integral to the cover, don’t know about pre 68 stuff though.
Yup. Almost all are. This is one that was part of a 'last run' of Pontiac parts GM made at the end of the production of the 400 in 1979 for people who needed replacement parts. I also have a 400 standard block from that run. You could buy these from the warehouses. Maybe still can.

  #14  
Old 04-12-2019, 10:17 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

You can look it up on the Wallace Racing timing cover page, part number 526985.

Wallace; http://www.wallaceracing.com/timing-cover-numbers.html

  #15  
Old 04-12-2019, 10:19 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Which brings me my next question;

What is an abbreviated dampener ?

  #16  
Old 04-12-2019, 10:47 AM
STEELCITYFIREBIRD's Avatar
STEELCITYFIREBIRD STEELCITYFIREBIRD is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: "STEELER COUNTRY"
Posts: 2,965
Default

They used them on lowest performance /rpm engines, I believe? ‘77 up, looks like a balancer without the outer ring...small diameter, about the size of std balancer without outer ring beyond the rubber divider.
Make sense?

BTW, I have that setup from a 77 GP 400, don’t believe it wouldn’t work for you without modifying it because of the small diameter of the matching balancer.


Last edited by STEELCITYFIREBIRD; 04-12-2019 at 10:54 AM.
  #17  
Old 04-12-2019, 10:52 AM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

My first assumption would be the previously mentioned "Hub" damper which was about 1/4th the size of a normal Pontiac Harmonic Damper.

Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
  #18  
Old 04-12-2019, 10:52 AM
TAQuest TAQuest is offline
Ultimate Warrior
 
Join Date: May 2005
Location: Bay City, Michigan
Posts: 1,000
Default

Quote:
Originally Posted by STEELCITYFIREBIRD View Post
They used them on lowest performance /rpm engines, I believe? ‘77 up, looks like a balancer without the outer ring...small diameter, about the size of std balancer without outer ring beyond the rubber divider.
Make sense?
Makes sense. So that means an original pointer wouldn't work with a regular diameter balancer. No sense in looking for an original pointer then. I'm thinking I'm going to get an older style cover.
Thanks.

  #19  
Old 04-12-2019, 10:59 AM
STEELCITYFIREBIRD's Avatar
STEELCITYFIREBIRD STEELCITYFIREBIRD is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: "STEELER COUNTRY"
Posts: 2,965
Default

http://www.78ta.com/HTAF/index.php?topic=11816.0
Too bad pics are gone

  #20  
Old 04-12-2019, 11:06 AM
Singleton Singleton is offline
Ultimate Warrior
 
Join Date: Apr 2011
Location: coastal Alabama
Posts: 1,230
Default

This one works with full size balancers. Seller is the Pontiac Dude.

https://www.ebay.com/itm/Pontiac-Tim...4AAOSwzrxUvrwA

__________________

66 GTO, 495, M22, Strange S-60 w/4.10
Sold new at Royal Pontiac (Dealer# 07-679)

70 Formula 400/auto
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:06 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017