| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#15
03-13-2020, 08:21 PM
|
|||
|
|||
Put a factory shroud on(its about 3" too narrow for this radiator), a 6 blade fan, swapped the 160 stat for a 180 stat, and it stays on the thermostat at 4000rpm on the freeway for extended runs...
I started off with the timing through the roof today(where I ended while testing with the electric fan setup), lowered it twice and it never changed the temp... Going to swap the fan with a derale 6 blade on Monday, and add a little more spacer to put the fan where i want it in the shroud, and will try it again on Tuesday when its warmer... At this point, I know its going in the right direction...It was climbing continuously after about a mile at 3500rpm on the freeway...You had to pull off to let it come back down, or it would climb till no mans land... |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode