[P@blo]

Originally Posted by 68hotbird

The 2148 should work with the road paver but its right at the lift limit will need the dogbone modification and close check to make sure the oil hole doesn't come up to high on any lifter bores that may have a factory chamfer.

Great information, thanks for asking good questions Will. If the HT-2148 lifter will work with the road paver it will definitely work on old faithful.

I pulled the trigger on a set of these lifters but have a question on the length of pushrod being used. The video states 5\8"-11\16" shorter but wanted to ask what you ended up using?