| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
70-77 am fm stereos use two delco modules for the preamp circuitry. The DM48. This radio had a bad one and as you may or may not know this part is not in reproduction. I reverse engineered the bad one and hand wired my own and it works perfect. This one is a prototype and I have also made this into a circuit board that will be a direct replacement for dead modules.
|
| The Following User Says Thank You to j69shep For This Useful Post: | ||
|
#2
|
||||
|
||||
|
That is so awesome.
You should post an ad for said service in the classified. I have a 65 am fm that had the big power transistor (D-501 IIRC) that was bad. I replaced it and it works great. I was able to find a NOS transistor on E bay. Not to many guys that restore old car radios.Kudos |
|
#3
|
|||
|
|||
|
I am finishing the circiut layout today and I should have working modules in house in a couple of week and the new module will be superior to the original by design. I am also remaking the larger DM28 found on plenty of early 70's delco am/fm stereo radios and even the casette player. I will post some pics later today. The availability of these parts should get alot of radios working again.
|
|
#4
|
|||
|
|||
|
Here it is. She's a beauty. Contact me if you need one. It should be available in a few weeks. Fully tested and plug and play.
|
|
#5
|
|||
|
|||
|
I've been searching on line for DM48 chips for weeks... finally happened across this thread. I think this is still the only solution? It's 10 years later, you'd think there'd be options.
|
|
#6
|
||||
|
||||
|
Check with S&M Electro-Tech aka Turnswitch.
They were super nice and sent me a used module. http://forums.maxperformanceinc.com/...ighlight=radio |
|
#7
|
||||
|
||||
|
Quote:
__________________
" Long may we DRIVE !" |
|
#8
|
||||
|
||||
|
Oh that is unfortunate sad news. If it was Greg, he was an exceptional person and I'm sure will be missed by all he helped.
|
|
#9
|
|||
|
|||
|
Hey j69shep,
I’m new to this forum. Been working on Delco radios for 15 years. Self taught in repairing the Delco 2700 and 2000 series. Every now and then I run across a part not being reproduced. This DM48 module is a hard one to find. I sure can appreciate some reverse engineering and someone taking the time to map this one out. Any chance of getting a couple of these completed DM-48 modules? I’ve been working on a ‘75 Delco Stereo. I am sure I have a bad one. |
|
#10
|
||||
|
||||
|
Unfortunately, j69shep hasn't been to the site for a couple years, so you may not get a reply.
|
|
#11
|
|||
|
|||
|
j69shep's contact info is on his Public Profile under vistor messages
__________________
66 GTO, 495, M22, Strange S-60 w/4.10 Sold new at Royal Pontiac (Dealer# 07-679) 70 Formula 400/auto |
| Reply |
|
|