Tom,
One of the problems with a dyno is looking at the output of one dyno to another. If we look at a Super Flow, Land and Sea or Stuska and have the same engine under the same conditions run on each. It is possible they may show the same uncorrected torque and HP. It is for sure they will not show the same corrected torque and HP. Each has their own software logic applied to the measured (uncorrected numbers). Almost everyone wants to look at corrected numbers. So from my standpoint if you dyno an engine when you go back and dyno it again use the same type if not the very same dyno.
Stan
|
Threaded Mode