Pontiac - Street No question too basic here!

          
Reply
 
Thread Tools Display Modes
  #1  
Old 06-13-2023, 03:03 PM
caddor38 caddor38 is offline
Senior Member
 
Join Date: Jun 2014
Location: Tampa
Posts: 134
Default vacuum pump recommendation

Hey guys,
any body have recommendation on a vacuum pump. It appears my vacuum canister will not provide adequate vacuum to operate my power brakes. I have seen these things go from 50 - 1000 bucks and just want to be get a decent one and be safe.

thanks

  #2  
Old 06-13-2023, 10:09 PM
TedRamAirII TedRamAirII is offline
Ultimate Warrior
 
Join Date: May 2014
Location: Ocala, Florida
Posts: 2,778
Default

There quite a few late model cars that use a electric vacuum pump. I'm sure they would be cheap from a salvage yard. I cant name one right now, off the top of my head. https://www.amazon.com/Auxiliary-Ele...52944119&psc=1

__________________
1968 Firebird 400 RAII M21, 3.31 12 bolt, Mayfair Maize.
1977 Trans Am W72 400, TH350, 3.23 T Top

Everyone you will ever meet knows something you don't.
Bill Nye.
  #3  
Old 06-13-2023, 10:20 PM
tstroud tstroud is offline
Senior Member
 
Join Date: Apr 2017
Location: Iowa
Posts: 187
Default

Check diesel trucks in the junkyard.
You can buy one new at the auto parts store but they will be a couple hundred bucks.


Sent from my iPad using Tapatalk Pro

  #4  
Old 06-13-2023, 11:23 PM
caddor38 caddor38 is offline
Senior Member
 
Join Date: Jun 2014
Location: Tampa
Posts: 134
Default

Quote:
Originally Posted by TedRamAirII View Post
There quite a few late model cars that use a electric vacuum pump. I'm sure they would be cheap from a salvage yard. I cant name one right now, off the top of my head. https://www.amazon.com/Auxiliary-Ele...52944119&psc=1
Yeah, I have seen that model and was wondering if that would work and give me the vacuum i need?

  #5  
Old 06-14-2023, 08:21 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Winchester, VA
Posts: 16,206
Default

9 times out of 10, the problem is the booster you have on the car, leaking, or not enough boost.

You are better off going to a 9" dual diaphragm booster if it's due to low vacuum from cam selection.

Vacuum pumps are problematic, and either don't provide enough boost or 'run out' before you're done needing vacuum. Not to mention most are loud, and vibrate a ton.


.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #6  
Old 06-14-2023, 09:26 AM
vertigto's Avatar
vertigto vertigto is offline
Chief Ponti-yacker
 
Join Date: Dec 2005
Posts: 894
Default

Just for reference, the new 9" dual diaphragm booster on my Right Stuff 4 disc conversion wouldn't adequately stop my GTO (couldn't lock 'em up). No leaks. Pulling about 15" at idle. Replacement MC sent (different DIA) and different pads did not make enough difference.

Hydroboost system fixed all that, but obviously not a cheap alternative. Works good though.

__________________

1970 GTO (Granada Gold) - 400 / TH400
  #7  
Old 06-14-2023, 09:41 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Winchester, VA
Posts: 16,206
Default

Quote:
Originally Posted by vertigto View Post
Just for reference, the new 9" dual diaphragm booster on my Right Stuff 4 disc conversion wouldn't adequately stop my GTO (couldn't lock 'em up). No leaks. Pulling about 15" at idle. Replacement MC sent (different DIA) and different pads did not make enough difference.

Hydroboost system fixed all that, but obviously not a cheap alternative. Works good though.
Interesting. I would have to suspect there may have been something else off, and the hydroboost masked it. Maybe pin depth/contact is off?

I'm pulling like 13", have a C6 front brake setup on front, 98 SS rear setup, and it def locks 'em up.

Have one on the 442, it has about 14.5", and it will throw you thru the windshield if youre not careful.

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #8  
Old 06-14-2023, 09:42 AM
HWYSTR455's Avatar
HWYSTR455 HWYSTR455 is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Winchester, VA
Posts: 16,206
Default

I know there was a rash of bad new boosters, maybe you got one of those...

.

__________________
.

1970 GTO Judge Tribute Pro-Tour Project 535 IA2
http://forums.maxperformanceinc.com/...d.php?t=760624
1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car
https://forums.maxperformanceinc.com...ght=procharger
Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be
  #9  
Old 06-15-2023, 01:37 PM
David Jones's Avatar
David Jones David Jones is offline
Ultimate Warrior
 
Join Date: Apr 2002
Location: Pleasant Grove, Alabama
Posts: 8,412
Default

Hydraboost.

__________________

frittering and wasting the hours in an off hand way....



1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core.

Last edited by David Jones; 06-15-2023 at 01:44 PM.
  #10  
Old 06-15-2023, 03:02 PM
vertigto's Avatar
vertigto vertigto is offline
Chief Ponti-yacker
 
Join Date: Dec 2005
Posts: 894
Default

Quote:
Originally Posted by HWYSTR455 View Post
I know there was a rash of bad new boosters, maybe you got one of those...

.
RIght Stuff claims 'no' and wouldn't replace. I am in agreement that it was probably inferior, but wasn't willing to throw more money at it/to them.

I do like the hydroboost and since my GTO is a little left of center (although NM engine/drivetrain), it's all good.

Now to get the failing upper ball joints replaced <sigh>.

__________________

1970 GTO (Granada Gold) - 400 / TH400
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:44 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017