[bulletpruf]

Ok, so I have the ignition switch bezel turning, but it's not coming off. It is supposed to unscrew once it's turning?

Or do I need to release the bezel or switch somehow using a paper clip in the small hole on the switch?

Thanks,

Scott

[dataway]

Take the lock cylinder out first by using a paper clip and turning the cylinder with the key.

Then reach up behind and hold the switch while you turn the bezel.

[rt400]

Turn the key to the left. Insert a paper clip and push it in while continuing to turn the key to the left. Cylinder should pop out.

[bulletpruf]

Got it. Thanks!