Quote:
Originally Posted by grd777
yes the P.O did all the work ,seems like all the linkage is there and the switch on the column is there . maybe i need to check if it is all connected correctly
is there any switch that goes on the tranny
|
On an original M22 4spd car there is a switch on the trans but that is for the TCS system, completely unrelated to your issue. The only switch involved in your back up lights is the switch at the base of the column near the firewall on the top side. Unplug the switch and connect the 2 wires together with a jumper. Your reverse lights should be on with the key on. Do the obvious checks, like your fuses. confirm that you have 12v on both sides of the connector once it's jumped. If so, check for power at your reverse lights.
.