[Ramairnacho]

Originally Posted by 78w72

FYI for those wanting to do this themselves- The wrinkle paint is pretty common from most brands and is not difficult to apply. Ive done at least 7 or 8 of these using Krylon & VHT wrinkle paints. Directions are on the can, with uniform heat like sitting in the sun for an hour or 2 or a heat gun or oven if you have one to use for paint/powder coat curing you can get very good results.

However if another person is offering the service with good results then thats an easier option but it can be done DIY for about $10 in paint the paint to match your interior if not black.

I believe there are 2 versions of the hub. Early version part number 13955 hard to find, later version 6000500 very common not same part.