[BMFGTO]

looking for hood release cable with handle and bracket that is attached to frame.
for 73 firebird.
Thanks, Ron

[1lms]

Contact Second Gen Graveyard
They are repopping it but not exactly

[BMFGTO]

They only sell latch not cable with handle and bracket

[65madgoat]

Restore a Muscle car sells this reproduction kit if you don't mind going that route.

https://www.restoreamusclecar.com/pa...ase-cable-kit?

['ol Pinion head]

The cable type release setup was first used in a '73 Bird, & with the small original parts often lost, misplaced, it's great deal that they have been reproduced.

['ol Pinion head]

Originally Posted by BMFGTO

They only sell latch not cable with handle and bracket

The cable style latch is beyond easy find as a used GM part.

[65madgoat]

That 1973 repop kit is not an exact match by any means but was made to work for 1973 cars which was a 1 year style.

An original 1973 stock set up sold on facebook for over $350 recently. Not easy to find - and expensive when you do. Restore a Musclecar at least has something that works you can get today.

['ol Pinion head]

realize, the repro is not flawless exact, have the original for my BG 4spd project.

[FASTASSBIRD]

Originally Posted by 65madgoat

That 1973 repop kit is not an exact match by any means but was made to work for 1973 cars which was a 1 year style.

An original 1973 stock set up sold on facebook for over $350 recently. Not easy to find - and expensive when you do. Restore a Musclecar at least has something that works you can get today.

It sold in less then three minutes and was actually bought by Dave Hall of RAMC. I do have another complete set up I think

[65madgoat]

If anyone has just the cable (with handle etc) I could use one. My cable is frayed and have yet to see if that can be repaired or replaced.

Thanks.