[R 70 Judge]

Originally Posted by charlie66

Yes, I got them on eBay . https://www.ebay.com/itm/265755232392 Hopefully this link works.

You should get the gt42 like Richard tested. He said it's good for 1200hp.

No ive never posted it here . Ill see if i can get some to load up here of my twin setup

Originally Posted by charlie66

yes, I got them both on.

The spool time is cut at least in half.

The power seems the same on top, but it comes on sooner with less throttle which is exactly what I was going for. I'm 100% happy and glad that I did the change. So glad I saw Richard's video. I haven't turned it up yet, I'm expecting nothing less than more improvement.

How's yours coming alone?

How are the turbos holding up? Any results yet?

[charlie66]

Originally Posted by R 70 Judge

How are the turbos holding up? Any results yet?

Zero issues, there holding up great. If I can figure out how to upload a video, I'll show you how fast they spool on the trans break at 5psi ...

How about you, any progress?

[charlie66]

I tried uploading the video with no luck. It tells me it's an invalid file ...

[johnta1]

PY doesn't support video.
You would need to use youtube or upload it on a website to have a link it downloaded it.

[R 70 Judge]

Originally Posted by charlie66

Zero issues, there holding up great. If I can figure out how to upload a video, I'll show you how fast they spool on the trans break at 5psi ...

How about you, any progress?

That's great news! I've been busy with home projects and coaching, but I plan on jumping back into the turbo stuff again in the new year. I tend to overthink things I have a new lower profile intake elbow on the way from Wilson's that will help with hood clearance. I want to run a factory steel hood instead of my fiberglass unit. With the way I want to package the system I think the GTX3584RS's will be my best bet. I want to retain my full 3" dual exhaust.

Wilson's elbow https://www.wilsonmanifolds.com/coll...acing-95-105mm

I've decided on the dual v-band 0.83AR units. They will make fabrication and fine tuning/tweaking the fitment easier. My plan is the package them similar to this with the downpipes running underneath/next to the crossmemeber tying in with my 3" exhaust

I'd really like to see the video if you could send it to me. Maybe via text or email?

https://www.ebay.com/itm/18650217493...Bk9SR8ictbjrZg

[charlie66]

Originally Posted by johnta1

PY doesn't support video.
You would need to use youtube or upload it on a website to have a link it downloaded it.

Oh ok. Thank you, John.

[charlie66]

Originally Posted by R 70 Judge

That's great news! I've been busy with home projects and coaching, but I plan on jumping back into the turbo stuff again in the new year. I tend to overthink things I have a new lower profile intake elbow on the way from Wilson's that will help with hood clearance. I want to run a factory steel hood instead of my fiberglass unit. With the way I want to package the system I think the GTX3584RS's will be my best bet. I want to retain my full 3" dual exhaust.

Wilson's elbow https://www.wilsonmanifolds.com/coll...acing-95-105mm

I've decided on the dual v-band 0.83AR units. They will make fabrication and fine tuning/tweaking the fitment easier. My plan is the package them similar to this with the downpipes running underneath/next to the crossmemeber tying in with my 3" exhaust

I'd really like to see the video if you could send it to me. Maybe via text or email?

https://www.ebay.com/itm/18650217493...Bk9SR8ictbjrZg

Sounds good.

I thought that you already bought the turbos months ago..

Here's my cell number 631 294 9095 . if you still want it . Here's my email too if you want = [email protected]