[mback12000]

I've installed an aftermarket 400 hood on my 68 Firebird and need to drill it for the pair of 400 emblems. Can anyone help by taking measurements off of a known OE hood for me? Need both sides and maybe some pics too, although anything much appreciated. Thanks in advance.

[Jason Rogers]

I can later tonight or tomorrow.

Sent from my SM-G860P using Tapatalk

[mback12000]

Thanks very much, but no longer needed. I found this and it seems to be accurate:
http://thefirstgensite.com/html/techdex.htm

[tekheavy]

Originally Posted by mback12000

Thanks very much, but no longer needed. I found this and it seems to be accurate:
http://thefirstgensite.com/html/techdex.htm

I realize this is an old thread, but this link doesn't work anymore. Does anyone have the hole locations for the emblem on a 400 hood? Thanks.

[JimFB400HO]

Originally Posted by tekheavy

I realize this is an old thread, but this link doesn't work anymore. Does anyone have the hole locations for the emblem on a 400 hood? Thanks.

From the Wayback Machine site: (Wayback saves internet pages over the years and often has old inactive stuff.)

https://web.archive.org/web/20180326...ml/techdex.htm

[tekheavy]

Originally Posted by JimFB400HO

From the Wayback Machine site: (Wayback saves internet pages over the years and often has old inactive stuff.)

https://web.archive.org/web/20180326...ml/techdex.htm

Thank you Jim.