[GameWarden]

Originally Posted by Verdoro 68

No silkscreens on the T/A air cleaners as far as I know. I actually haven't seen any silkscreens on a Pontiac air cleaners after '69.

I've sold quite a few Corvette oil filter and air cleaner screens. The later oil filter screens are spot on. I was working with a guy in the Vette community on the earlier screens and had him measure, validate and sign off against an NOS example before I burned the screens. Of course after I burned 30 of them he came back and said they're 1/4" too small. Ugh.

VERDORO 68, stumbling around I came across this interesting thread that started three years ago. On May 16, 2025 I purchased (with member BaronVonZeppelin assistance) a beautiful Adriatic Blue, 1971 400, M20 #s car, except for the 69 RA3 exhaust manifolds. Although I will be taking this 'baby doll' to shows this summer, it is not my purpose or interest to be in the class of factory assembly line perfection. Oh, I purchased the GTO on BaT.

Anyway, on April 10 I ordered a 1971 Decal Kit from Ames. They are on B/O. Would they be your decals?
Also, I am interested in purchasing a 'Pontiac Tachometer' T shirt. How is this accomplished? Do you have any T-shirts with a 1971 (Not Judge) GTO pictured or written? Thank you most kindly. Richard (GameWarden)

[Held for Ransom]

Originally Posted by GameWarden

VERDORO 68, stumbling around I came across this interesting thread that started three years ago. On May 16, 2025 I purchased (with member BaronVonZeppelin assistance) a beautiful Adriatic Blue, 1971 400, M20 #s car, except for the 69 RA3 exhaust manifolds. Although I will be taking this 'baby doll' to shows this summer, it is not my purpose or interest to be in the class of factory assembly line perfection. Oh, I purchased the GTO on BaT.

Anyway, on April 10 I ordered a 1971 Decal Kit from Ames. They are on B/O. Would they be your decals?
Also, I am interested in purchasing a 'Pontiac Tachometer' T shirt. How is this accomplished? Do you have any T-shirts with a 1971 (Not Judge) GTO pictured or written? Thank you most kindly. Richard (GameWarden)

His inventory can be purchase from his etsy account.
https://www.etsy.com/shop/GasTiresandOil

[Verdoro 68]

Originally Posted by GameWarden

Anyway, on April 10 I ordered a 1971 Decal Kit from Ames. They are on B/O. Would they be your decals?
Also, I am interested in purchasing a 'Pontiac Tachometer' T shirt. How is this accomplished? Do you have any T-shirts with a 1971 (Not Judge) GTO pictured or written? Thank you most kindly. Richard (GameWarden)

Ames carries some of my decals, but not all of them. They primary carry the waterslides I make. The ‘71 decals they offer aren’t from me and likely still have the cut off graphics.

As HFR said, you can get your decals and shirts from my Etsy store. I’ve avoided putting cars on the shirts and favored highlighting design details instead - hence things like the shifter knob and hood tach. I haven’t made any new shirts in a while. I should put some new designs together for the show season

[ts3189]

I received my hood tach shirt last week. First day I wore it a guy said to me “ if ya know ya know” 👍👍

[Verdoro 68]

The hood tach shirts have been pretty popular. I wear mine all the time. I like that it doesn't have a lot of printing on it which can make the shirt feel a little stiff.

[HO LEMANS]

Originally Posted by Verdoro 68

The hood tach shirts have been pretty popular. I wear mine all the time. I like that it doesn't have a lot of printing on it which can make the shirt feel a little stiff.

I'm loving mine and I'll be wearing it to the big swap meet in Lawrence Ks tomorrow doing a bit of advertising for you

[mgarblik]

I am looking for the correct coolant sticker for the core support of my 1973 SD. It is supposed to have rounded corners which the current reproductions don't have. They also are printed on plain paper and smear easily. Just typical low quality stuff. Do you happen to make that sticker?

[Verdoro 68]

If someone can provide an example with a few good pics and measurements I'm sure I can make it.

[Held for Ransom]

Originally Posted by Verdoro 68

If someone can provide an example with a few good pics and measurements I'm sure I can make it.

You'll need more examples, but I sent an E-mail to you.

[Verdoro 68]

Thanks Mike. Much appreciated.

[mgarblik]

Thanks guys. I don't even have a lousy original one. I will look around for some pics. BTW, I have your SD-455 valve cover sticker on now. It looks great. A few pics in my SD thread near the end.

[Held for Ransom]

I should add they do have the rounded corners out there. But, no one has a correct skull and crossbones.
https://www.opgi.com/decals/engine-c...4-DC00271.html

Square corners one...
https://www.classicindustries.com/product/dc134.html

[Held for Ransom]

Originally Posted by Verdoro 68

Thanks Mike. Much appreciated.

The perfect example from Enrico's SD. Includes the emissions decal for the SD too.
https://forums.maxperformanceinc.com...&postcount=177

[mgarblik]

Excellent pictures of the stickers.

[Verdoro 68]

I’ll get to work on these. Stay tuned.

[mgarblik]

Thank you for taking this on. Your a problem solver. I have no doubt they will be top notch. Do you have the necessary outside dimensions?

[Verdoro 68]

HFR sent me some pics with measurements, but I’ll always take more references if you have them.

[mgarblik]

Originally Posted by Verdoro 68

HFR sent me some pics with measurements, but I’ll always take more references if you have them.

I actually don't have a good reference. But I have heard some of the current ones are too big.

[mgarblik]

Just checking for any updates. Appreciate your efforts

[Verdoro 68]

Sorry, no updates just yet. Give me a couple more days to get the initial pass of the art done.