Pontiac - Race The next Level

          
Reply
 
Thread Tools Display Modes
  #381  
Old 01-02-2013, 04:23 PM
twinturrbo406's Avatar
twinturrbo406 twinturrbo406 is offline
Ultimate Warrior
 
Join Date: Nov 2007
Location: OuterSpace
Posts: 2,204
Default

[QUOTE=LiL Jack;4819346]
Quote:
Originally Posted by GREATGTO View Post
I haven't put pressure on anyone, the whole Langer deal was before Bill was even involved with my engine other than building it at that time. Not to the extent it is now.
I said I WAS WILLING TO BUILD, my own car to race Langer, the camaro is not my car. This is when Bill said he would like to run my engine , back when he had the 63 lemans. I used to have an Art Morisson full chassis ready to go but I decided to stay with a street car and the chassis was sold, this happen the first year cv1's were released, so my plans were to build a real street car not a race car before any of this crap started. If I had continued to build my 68 gto race car it probably would have been done by now.
M
Im sure Bill will race anyone that wants a race, including Langer, but it has nothing to do with me other than he is using my short block. After he is done with my engine the compression will be dropped along with a whole new top end for street use.

If the question is do I believe he can beat Langer? YES! Bill said it would be a good race, period, no guarantee of a win or anything like. Racing Langer would be the fastest way to quiet everyone down, because if he beat Langer or even came close it pretty much would mean he just beat everyone slower than Langer, that would be all you guys!!!

Why waste time with the East Coast Morons ?[/QUOTE


You or Bill do not have the slightest phucking clue of what it takes to have the caliber of racing operation that Langer does!

All you two are is a bunch of keyboard jockeys that talk the talk, but can't walk the walk!
... LMAO, whatever Jack, nobody has talked more chit then you Jack, and as far as i'm concerned, you have not out run Robin's car, because that East Coast Air chit dont hold water with me, so to me, what your heap runs at Norwalk, is what it runs ...

... dude, you've flown off at the lips for years, and now you run your car a handful of times and you are a superstar drag racer ?? what a joke, if i'm a Keyboard Jockey, then you are nothing more than an Internet Azzclown, lol ...

... i'd like to see you develop a completely new top end (heads & manifold), do all the finish work and assembly, fabricate that manifold, spec & build your own carb (Anderson Port Development), fabricate your own RacePlate style headers, blueprint-spec-machine-assemble your own engine, and then test & tune that engine on the dyno, and then show up at the track and race that same combo ?? ...

... you are a complete IDIOT compared me and you know it, i dont care that you can simply drive that 65' that you've owned for how long now ?? You are not even in the same league as me DS ...

... YOU ARE A CHECK WRITTING PLUMBER, that happens to own a race car, and thats it !!! ...


Last edited by twinturrbo406; 01-02-2013 at 04:49 PM.
  #382  
Old 01-02-2013, 04:31 PM
twinturrbo406's Avatar
twinturrbo406 twinturrbo406 is offline
Ultimate Warrior
 
Join Date: Nov 2007
Location: OuterSpace
Posts: 2,204
Default

Quote:
Originally Posted by mike leech View Post
What happened to cv1 horsepower is cheap??? I thought you guys were mr budget????

Like i said I'll run ya if thats where you want to go, I think johns your huckleberry.....And a better match. But since you guys just won't race without some ridiculous advantage I'll give you the 75 i guess it is cu,and daren morgan double throwdown help, just so we all can finally see somebody race if your to chicken to face john...With john you really will have a 90 ci advantage.

... jeez Mike, all told you was i would race you, because i cant control anyone else's projects, and i said it wasn't a good match, but you are the one wanting to rcae a CV-1 car, so i agreed, what do want me to do, build an engine that is exactly the same size as yours to run you ?? ...

... obviously i'm already into the big motor, so what more can i do, either we can race, or we dont, i'm just tryin' to give you what you're asking for to the best of my ability Mike ?? ...

... and no, i'm not afraid of running Marcella either ... we had that arranged long time ago ...

... and as for the cheap HP ?? I dont have that $40K in the motor Mike, notice i said Car & Engine ?? Hello ?? but CV-1's offer the best bang for the buck, PERIOD !!! and Robin's car proves that beyond doubt ... but we are working on the N/A side of things and are looking forward to getting those results ...

... or did you forget ?? ...


(Well Over $12K) to Duplicate !!


Last edited by twinturrbo406; 01-02-2013 at 04:40 PM.
  #383  
Old 01-02-2013, 04:42 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Everything about Bills car and motor is new and untested and you guys claim he has or needs a ridiculous advantage, I mean the heads are nothing more than flow bench queens, cant make to same hp as a junk eheads, the engine is big and lazy, Bill isn't a racer etc etc..Should be a cake walk for everyone.

__________________
Car Craft Garage.
Automotive Restoration
  #384  
Old 01-02-2013, 04:45 PM
R 70 Judge's Avatar
R 70 Judge R 70 Judge is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: San Diego, CA
Posts: 2,909
Default

Quote:
Originally Posted by GREATGTO View Post
I predict you will make both of them your bitch Bill, no pressure though lol, this is all in fun for us anyway, win lose or draw, we are street car guys remember. It wont look good if you beat pros like these guys being a knuckle dragger non racer like yourself now would it.
$20 says Marcella whoops your butt by at least 3 tenths. At any weight, run what you brung.

We have a bet?


__________________
James
1970 Trans Am

Spotts Built 484" IA2, Highports, EFI Northwind, E85
Holley Terminator X sequential EFI fabrication and suspension by
https://www.funkhouserracecars.com/
  #385  
Old 01-02-2013, 04:47 PM
R 70 Judge's Avatar
R 70 Judge R 70 Judge is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: San Diego, CA
Posts: 2,909
Default

Quote:
Originally Posted by GREATGTO View Post
Everything about Bills car and motor is new and untested and you guys claim he has or needs a ridiculous advantage, I mean the heads are nothing more than flow bench queens, cant make to same hp as a junk eheads, the engine is big and lazy, Bill isn't a racer etc etc..Should be a cake walk for everyone.
When will it be done?

__________________
James
1970 Trans Am

Spotts Built 484" IA2, Highports, EFI Northwind, E85
Holley Terminator X sequential EFI fabrication and suspension by
https://www.funkhouserracecars.com/
  #386  
Old 01-02-2013, 04:49 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Quote:
Originally Posted by R 70 Judge View Post
$20 says Marcella whoops your butt by at least 3 tenths.

We have a bet?

Sure, I hope he runs better his next time out, becuase if he beats us by 3 tenths that means the camaro will only be running in the 9's

__________________
Car Craft Garage.
Automotive Restoration
  #387  
Old 01-02-2013, 04:51 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Quote:
Originally Posted by R 70 Judge View Post
When will it be done?
When its done. And if you're wondering what hp it will make, the most we can get for what we have.

__________________
Car Craft Garage.
Automotive Restoration
  #388  
Old 01-02-2013, 04:51 PM
twinturrbo406's Avatar
twinturrbo406 twinturrbo406 is offline
Ultimate Warrior
 
Join Date: Nov 2007
Location: OuterSpace
Posts: 2,204
Default

Quote:
Originally Posted by R 70 Judge View Post
$20 says Marcella whoops your butt by at least 3 tenths. At any weight, run what you brung.

We have a bet?


... $20 ??? ... what, did you just make your mortgage payment or something ?? ...

  #389  
Old 01-02-2013, 04:54 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

He probably just bought more tempest parts, I'm gonna barrow the 20 bucks I bet him from Marcella

__________________
Car Craft Garage.
Automotive Restoration
  #390  
Old 01-02-2013, 04:58 PM
R 70 Judge's Avatar
R 70 Judge R 70 Judge is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: San Diego, CA
Posts: 2,909
Default

Quote:
Originally Posted by twinturrbo406 View Post
... $20 ??? ... what, did you just make your mortgage payment or something ?? ...
Friendly bet. It's not about the amount. Things get way too serious when "real" money is on the line.

Besides, I'm spending all my money trying to get my junk together before Pontiac Heaven this year. Hope to see you guys there

__________________
James
1970 Trans Am

Spotts Built 484" IA2, Highports, EFI Northwind, E85
Holley Terminator X sequential EFI fabrication and suspension by
https://www.funkhouserracecars.com/
  #391  
Old 01-02-2013, 05:06 PM
R 70 Judge's Avatar
R 70 Judge R 70 Judge is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: San Diego, CA
Posts: 2,909
Default

Quote:
Originally Posted by GREATGTO View Post
He probably just bought more tempest parts, I'm gonna barrow the 20 bucks I bet him from Marcella
Well if they were cheap to build there wouldn't be a Camaro running around with a Pontiac engine in it, would there

Sincerely, good luck to you guys. I'd hand over the $20 with a smile and a handshake because building an 8 second N/A engine sure isn't easy and it would be quite an accomplishment.

__________________
James
1970 Trans Am

Spotts Built 484" IA2, Highports, EFI Northwind, E85
Holley Terminator X sequential EFI fabrication and suspension by
https://www.funkhouserracecars.com/
  #392  
Old 01-02-2013, 05:09 PM
Ron H's Avatar
Ron H Ron H is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Great White North
Posts: 5,807
Default

DaftGTO. You should really keep your yap shut. You have not done one thing that you said you would or otherwise. I am sick of looking at that picture of your engine that has never been fired. It's been over two years and your easy 8 second pump gas ride hasn't moved an inch.

Now you've latched onto Bill's nuts and are hugging him in hopes of being your saviour for all your "predictions".

It's better to let everyone think your a moron by keeping your mouth shut than opening your mouth and proving it.

__________________
68 Firebird
Are you running with the wind or breaking it?
  #393  
Old 01-02-2013, 05:17 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by Ron H View Post
DaftGTO. You should really keep your yap shut. You have not done one thing that you said you would or otherwise. I am sick of looking at that picture of your engine that has never been fired. It's been over two years and your easy 8 second pump gas ride hasn't moved an inch.

Now you've latched onto Bill's nuts and are hugging him in hopes of being your saviour for all your "predictions".

It's better to let everyone think your a moron by keeping your mouth shut than opening your mouth and proving it.
I just laughed so hard i think i mighta pulled a muscle..

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #394  
Old 01-02-2013, 05:19 PM
twinturrbo406's Avatar
twinturrbo406 twinturrbo406 is offline
Ultimate Warrior
 
Join Date: Nov 2007
Location: OuterSpace
Posts: 2,204
Default

Quote:
Originally Posted by Ron H View Post
DaftGTO. You should really keep your yap shut. You have not done one thing that you said you would or otherwise. I am sick of looking at that picture of your engine that has never been fired. It's been over two years and your easy 8 second pump gas ride hasn't moved an inch.

Now you've latched onto Bill's nuts and are hugging him in hopes of being your saviour for all your "predictions".

It's better to let everyone think your a moron by keeping your mouth shut than opening your mouth and proving it.

... well, while i can see GREATGTO has rubbed your rhubarb Ron, he has done just a bit more than swing from my nutz, he single-handly fabricated 2 custom manifolds for the CV-1 program, he has also performed other extensive fabrication tasks for the program, and also supplied a complete short-block (572) which has a certain value to it obviously, all the while performing a "Frame-Off Restoration" on 3 seperate Pontiacs in his own time ...

... he is not a nut hugger, his is my right hand man ... ... ok, sometimes the left, lol ... (j/k)

  #395  
Old 01-02-2013, 05:21 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Quote:
Originally Posted by Ron H View Post
DaftGTO. You should really keep your yap shut. You have not done one thing that you said you would or otherwise. I am sick of looking at that picture of your engine that has never been fired. It's been over two years and your easy 8 second pump gas ride hasn't moved an inch.

Now you've latched onto Bill's nuts and are hugging him in hopes of being your saviour for all your "predictions".

It's better to let everyone think your a moron by keeping your mouth shut than opening your mouth and proving it.

You DS, Bills engine is my short block, why dont you read before you respond, my car would be done but the engine is going in Bills camaro, understand genius?

Where the hell do these morons come from?

__________________
Car Craft Garage.
Automotive Restoration
  #396  
Old 01-02-2013, 05:23 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Quote:
Originally Posted by mike leech View Post
I just laughed so hard i think i mighta pulled a muscle..
You must be on his level.

__________________
Car Craft Garage.
Automotive Restoration
  #397  
Old 01-02-2013, 05:24 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

[QUOTE=twinturrbo406;4819588]
Quote:
Originally Posted by LiL Jack View Post

... LMAO, whatever Jack, nobody has talked more chit then you Jack, and as far as i'm concerned, you have not out run Robin's car, because that East Coast Air chit dont hold water with me, so to me, what your heap runs at Norwalk, is what it runs ...

... dude, you've flown off at the lips for years, and now you run your car a handful of times and you are a superstar drag racer ?? what a joke, if i'm a Keyboard Jockey, then you are nothing more than an Internet Azzclown, lol ...

... i'd like to see you develop a completely new top end (heads & manifold), do all the finish work and assembly, fabricate that manifold, spec & build your own carb (Anderson Port Development), fabricate your own RacePlate style headers, blueprint-spec-machine-assemble your own engine, and then test & tune that engine on the dyno, and then show up at the track and race that same combo ?? ...

... you are a complete IDIOT compared me and you know it, i dont care that you can simply drive that 65' that you've owned for how long now ?? You are not even in the same league as me DS ...

... YOU ARE A CHECK WRITTING PLUMBER, that happens to own a race car, and thats it !!! ...
It seems you may have him covered on the idiot thing. One way or another he has a good running car thats proven and you....well.....don't. Your hatred of things non cv1 and bias of cv stuff and your abilities has clouded you judgement. If your engine deal doesn't prove you are the Messiah....then what. Go a little easier bill, its easier to pick yourself back up if you don't fall from such a high place.

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #398  
Old 01-02-2013, 05:28 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Bill works on everyhting, not cv1 bias at all, I guess you didnt see the tigers, eheads and hiports he is working on. You are like Ron.

__________________
Car Craft Garage.
Automotive Restoration
  #399  
Old 01-02-2013, 05:32 PM
mike leech's Avatar
mike leech mike leech is offline
Ultimate Warrior
 
Join Date: Jul 2004
Posts: 4,658
Default

Quote:
Originally Posted by GREATGTO View Post
You must be on his level.
I sure as hell am not on yours! That turd better be the best thing ever with a pontiac name on it or you will look like fools. So l got this strait....You're sayin that since you have accomplished squat after running you mouth about running 8s for 2 years...is because you couldn't due to your motor going into bills car that is ....also not running either?????

I don't think anybody gets that....that doesn't need a mood stabilizer and anti psychotic.

__________________
EHTTFMF!


Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead.
BEING STUPID WORKS THE SAME WAY! The rest of us suffer.
  #400  
Old 01-02-2013, 05:37 PM
GREATGTO's Avatar
GREATGTO GREATGTO is offline
Ultimate Warrior
 
Join Date: Dec 2004
Posts: 2,199
Default

Quote:
Originally Posted by mike leech View Post
I sure as hell am not on yours! That turd better be the best thing ever with a pontiac name on it or you will look like fools. So l got this strait....You're sayin that since you have accomplished squat after running you mouth about running 8s for 2 years...is because you couldn't due to your motor going into bills car that is ....also not running either?????

I don't think anybody gets that....that doesn't need a mood stabilizer and anti psychotic.
I havent been talking about running anything, I said what it should run 2 years ago before Bill got the short block, that was the last time I said I WOULD RUN 8'S! You people see stuff that doesn't exist. Where are all these supposed post of me saying I'm going to run 8's over and over. S ounds like you need some meds not us.

__________________
Car Craft Garage.
Automotive Restoration
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:13 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017